Expert 519018 - CT

Expertise Description

As a fire protection engineer, I have more than 15 years experience in Connecticut with expertise in combustion, industrial fire protection, and explosion protection. I have additional expertise in industrial safety, process safety, accident analysis, and fire safety standards.

Expert 523144 - AL AK AZ AR BC CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA QC RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I am experienced in the field of roadside safety engineering. While working at a prominent research institute in the field of transportation safety engineering, I assisted in constructing roadside and median safety features for the purpose of conducting standardized crash testing according to NCHRP Report 350 and MASH test protocols. I also documented some of those tests by recording observations, taking measurements of various forms of damage, and compiling technical reports. I also researched ditches, crash cushions, low-volume roads, trees, cable guardrail, W-beam guardrail, concrete median barriers, and temporary concrete barriers. I also investigated the fracture behavior of thin steel under dynamic loading conditions. I am familiar with dynamic and static component testing, computer simulation via LS-Dyna, and full-scale crash testing for Federal approval of highway safety appurtenances. I have also taught classes on elasticity, continuum mechanics, fracture mechanics, and LS-Dyna. I have also conducted a statistical analysis of the in-service performance of guardrail terminals. I have offered my services as a roadside safety engineering expert witness by providing consultations, courtroom testimony, and deposition.

Expert 520535 - CA(S)

Expertise Description

I have more than 45 years experience in the field of engineering and have acted as a consultant/expert witness in slip/trip and fall litigation at locations ranging from Guam to Bermuda. I have also worked as a Project Manager and Principal Investigator of an OSHA-driven one-man-year project to minimize slipping incidents on construction-site steel products. I have also conducted laboratory and field testing of pedestrian surfaces for slip resistance.

Expert 506679 - AL AK AZ AR BC CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA QC RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I have over 10 years of experience in industrial controls. I was founder and CTO of a company providing advanced motion control for industrial cranes and robotic material handling systems. In this capacity I architected technologies now well-known for enhancing crane-ease-of-use and safety. These have been adopted by Caterpillar, Cummins, Johnson Controls, GM, Hyundai, Toyota, Ford, Kia, Alcoa, Novelis and other first-tier manufacturers. I have extensive experience in motion control, dynamics, vibration, PLCs, system design, machine vision, and photogrammetry. I am an active lecturer on various mechanical and controls engineering topics including The Design Process, Advanced Motion Control, Mechatronics, and Engineering Intellectual Property. I have presented invited talks at premiere institutions including the Massachusetts Institute of Technology, Georgia Institute of Technology, Kumoh National University of Technology, the Korea Atomic Energy Research Institute, Hyung Hee University, and others. I have published numerous refereed journal and conference articles pertaining to industrial motion control and human factors in crane control, and hold one patent related to crane control. A second application has been submitted. I am engaged in directing research efforts investigating crane control, motion planning, crane safety systems, and collision avoidance. I have also worked as an industrial crane controls expert witness in Georgia.

Expert 520903 - MO

Expertise Description

I have over two decades of experience in Mechanical Engineering manufacturing fuel-fired appliances. I have expertise in fire causation and explosion investigations, manufacturing equipment evaluations, failure analysis of components, product liability evaluations, fuel-fired appliances, gas supply systems, HVAC equipment, residential/commercial building code compliance, and fire suppression systems. I have also spent time as a mechanical engineering expert witness in Missouri.

Expert 520704 - MD

Expertise Description

I have been working in the field of Ship Design for over 50 years with a specific focus in naval engineering and ocean engineering. I have worked with Shipbuilding, Power Systems and Electronics, Alternative Energy, Business, Education, and Personnel Development. I have also spent time as a ship design expert witness in Maryland by providing numerous clients with consultations, deposition, and courtroom testimony.

Expert 519133 - NJ NY

Expertise Description

With more than 15 years experience in the Maritime Industry, I have particular knowledge of matters involving ships, ports and terminals, including oil/gas offshore installations, machinery failure investigation propulsion and ship component design, project management, and ship inspection. I have additional experience in maritime education and training in U.K, the Caribbean and U.S.A. I have providing services as a maritime expert witness in New York and New Jersey for over 5 years by providing consultations, in addition to courtroom testimony and deposition.

Expert 519923 - NY

Expertise Description

My career of over 30 years has been focused on mechanical engineering with a particular expertise in the cause and origin of auto, truck, tractor-trailer, bus, motorcycle, snowmobile, bicycle, and other non-motorized vehicle accident investigations; accidents related to design or manufacturing defects and improper use of products; assessment of construction accidents, including examination of equipment, equipment use, safety features and guarding; integrity analysis of commercial and residential buildings; and slip and fall accidents, walkways, stairways, ramps, pavement, and floors. With more then 15 years as a mechanical engineering expert witness in New York, I have offered consultations, courtroom testimony, and deposition.

Expert 520117 - WA

Expertise Description

My background of over 10 years as a mechanical engineer and industrial hygienist has been focused in heating, ventilation and air conditioning (HVAC) design, construction, and specification of commercial buildings, including code compliance, LEED compliance, and building performance compliance. I have additional expertise in mold sampling and remediation, performing indoor air quality evaluations relating to HVAC, building envelope, and the environment as well as performing forensic evaluations involving HVAC and refrigeration equipment and systems. I have additional knowledge in vehicular accident investigation and reconstruction of low-speed, bicycle, and pedestrian accidents, as well as failure investigation and analysis of consumer products, industrial equipment and left safety systems. My experience also includes having spent over 5 years as a mechanical engineering and industrial hygiene expert witness in Washington by providing such services as consultations, deposition, and courtroom testimony.

Expert 520003 - CA(N)

Expertise Description

My prior experience in the field of Mechanical Engineering has been focused on engineering design, prototyping, and manufacturing. My past large design projects have been devices which people interact with, mostly in athletics, but also some smaller devices. My projects include the commercialization of a ski binding plate designed to reduce the probability of suffering an ACL injury while skiing, a 250 million dollar problem in the USA affecting over 20,000 people a year. I am available in Northern California as a mechanical engineer consultant and sports equipment expert witness.

Expert 457056 - FL

Expertise Description

With more than 55 years experience in the state of Florida working in the field of Mechanical Engineering, I have specialized in HVAC, plumbing, and building envelope integrity. I have additional knowledge in fire protection and electrical engineering for buildings. For over 30 years, I have offered my services as a mechanical engineering and HVAC expert witness in Florida by providing consultations for various clients, as well as deposition and courtroom testimony.

Expert 518848 - NY

Expertise Description

My career of over 20 years in the field of mechanical engineering has specialized in finite element analysis, strain gage testing, mechanical design, and fatigue design. I have additional knowledge in linear and non-linear studies, contact analysis, bolted joints, welds, fatigue, modal analysis, and both steady state and transient thermal studies, including thermal-structural interactions.

Expert 519300 - FL

Expertise Description

I have spent over 5 years as a forensic consultant with a background in mechanical engineering, vehicle dynamics, collision reconstruction and driver factors. I have expertise in mechanical systems with an emphasis on analytic analysis including kinematics, kinetics, dynamics, and failure methods, crash investigation and accident reconstruction of automobiles, commercial vehicles, motorcycles, bicycles, pedestrians and other transportation modes. I have additional experience with design for manufacturing, including parametric CAD modeling and the proprietary mechanical design of safety equipment for industrial and consumer markets in the US and Europe. I have prior experience working as a mechanical engineering expert witness in Florida.

Expert 519091 - AL

Expertise Description

I have worked for more than 15 years in Firearms Design as a design engineer in the Firearms Industry. I have expertise in CAD (solid modeling, surfacing, drafting) with most recent experience using Solidworks & CATIA V5, SDRC I-DEAS & Pro-E. I have additional expertise in project management, design of new product platforms and line extensions, design of components and mechanisms, troubleshooting design issues, designing tests and conducting development qualification testing, designing machined components, forging, injection molded plastic and composite parts, MIM parts, investment castings, springs, stampings, bolts, receivers, and barrels, line extensions to existing rifles and the design, development, and delivery to market of the M&P-10 rifle platform.

Expert 19556 - WA

Expertise Description

I have over 30 years experience in engineering specializing in fires; explosions; fire protection; civil, electrical and mechanical failure analysis; design; construction; management of industrial plant production equipment; material handling machinery; and explosive mining equipment. My areas of expertise include fire cause and origin, explosions, large loss expert coordination and related mechanical and electrical failures. I have previously been deposed and have testified as an expert witness.

Expert 518674 - NC

Expertise Description

I have been working in the Elevator and Amusement Device Industries for more than 20 years with expertise in the assessment, inspection, training, and project management liaison services focused on the elevator (vertical transport vehicle) and amusement device industries. I have been the President of a company that provides such services as site and annual safety assessments and inspections, equipment audits, maintenance evaluations, contract reviews for code compliance, contract quality assurance assessments, midway and location safety assessments. I have an additional 5 years of experience performing inspections on zip lines. I have also spent over 5 years providing consultations, deposition, and courtroom testimony.

Expert 511375 - CA(S)

Expertise Description

My background in design and construction administration has lasted for more than 30 years with expertise in mechanical, plumbing, fire protection and energy management systems for commercial, institutional and residential facilities. I have additional knowledge in design and forensic analysis of HVAC, plumbing, fire protection and energy management systems. I have been recruited for previous expert witness work.

Expert 518383 - OR

Expertise Description

I have more than 40 years of Engineering experience, with an expertise in electronic and electromechanical instrumentation design. I am skilled in design of molded plastic, sheet metal, extrusions and castings, as well as current rapid prototyping processes. I have been the owner of an engineering firm which provides design, evaluation, and problem-solving for more than 40 clients in electronics, sports fitness, and medical mobility. I have had prior experience as Chair to a mechanical engineering advisory board for a university. I led a team of 6 industry experts to review course improvements and assure relevant metrics for attaining and keeping accreditation.

Expert 518054 - UT

Expertise Description

I have more than 10 years of experience in Mechanical Engineering. I also have experience as a Professional Engineer, as well as a design engineering for cargo tanks, and have worked as a forklift operator trainer. I have designed and analyzed numerous products including end dump trailers, side dump trailers, pneumatic trailers, tarping systems, insulated aerial lifts, automated refuse trucks, refuse truck safety systems, material handling equipment, patient moving systems, bike racks and numerous custom testing devices. Some of the testing I have performed includes: cycle testing, strength testing, deflection testing, function testing, and different types of destructive and non-destructive testing to acquire the necessary data. I am familiar with patent prosecution and patent litigation and have written multiple provisional patent applications, and specifications for utility patents. I have also created line drawings for multiple patent applications. I have also been involved in patent litigation and performed multiple invalidity and infringement analyses. I have over 5 years of expert witness experience with consultations and deposition.

Expert 446602 - CA(N)

Expertise Description

I have more than 35 years experience in the field of Mechanical Engineering with expertise in high-technology applications. I have experience with medical device/biotech product development & concept design, patent and intellectual property research and due diligence, biomaterials applications, portable devices, keypads, robust design, reliability and durability, and manufacturing technology. I have additional experience with reliability and failure analysis services, composite materials, and wind and alternative energy applications. I have over 25 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 517852 - CA(S)

Expertise Description

I have more than 20 years of experience in Mechanical engineering. As a Professor, I teach and do research on topics within the field. My current research activities include the development and use of micro-resolution particle image velocimetry (PIV) for measuring velocity fields in micro-scale flows, as well as the development of ac electrokinetic-based techniques for enhancing immunoassays and stem cell culturing, Ti-based thermal ground planes for cooling IC chips, and the development of free surface fluidics (FSF) and combining with SERS for trace chemical detection. I have over 10 years of expert witness experience with consultations and deposition.

Expert 417430 - TX

Expertise Description

I have more than 45 years of experience in the Elevator Industry with expertise in providing due diligence and maintenance audits on exiting and new equipment. Previously to becoming President of an elevator consulting company, I have worked as President of the management and sales of elevator control systems, and also performed maintenance of over 1,400 elevators. Many elevators were new constructions, as well as some to be modernized and repaired. I have over 10 years of expert witness experience with consultations, deposition, and courtroom testimony.

Expert 517127 - LA

Expertise Description

I have more than 20 years of experience in the field of Mechanical Engineering. As Principal Engineer of my firm, I perform finite element analysis (FEA) and computations fluid dynamics (CFD) for design, failure analysis, and fitness-for-service for process and mechanical equipment. I have experience with general code issues, metallurgical failure analysis, product laboratory testing; materials, corrosion, metallurgical, and weld procedure; and troubleshooting services. I also process-design and vibration analysis support. I have prior expert witness experience.

Expert 374594 - MI

Expertise Description

I have more than 40 years of experience in the field of Forensic Engineering, as a Registered Professional Engineer, with expertise in Construction Engineering. I own a consultancy that provides services with regard to construction, design, and installation defect disputes for all building types and systems. I also am President of an additional company where I am responsible for all design, construction administration, and engineering and project management. I have experience with mechanical, electrical, plumbing and fire protection engineering design and project management for institutional, industrial, health care and residential projects. I have over 10 years of expert witness experience with consultation, deposition, and courtroom testimony.

Expert 511411 - MI

Expertise Description

I have more than 55 years of experience in the Diesel industry as a Mechanical Engineer. I provide consulting services regarding diesel engines, diesel combustion, alternative fuel engines, alternate fuels, hybrid powertrains, emissions from engines and government regulations on engines. I can provide expert witness testimony regarding product liability cases and regarding asbestos in diesel engines. I have over 15 years of expert witness experience with consultations, deposition, and courtroom testimony.

Expert 514999 - NY

Expertise Description

I have more than 15 years of experience in Mechanical Engineering. As a Professor, my teaching strengths include the energy sciences such as thermodynamics, heat transfer, and fluid dynamics, and engineering mechanics such as the fundamentals of mechanical design, strength of materials, and statics. Research has included a project focused on developing and testing alternative fueled engines utilizing advanced combustion methods, development of a 50hp two –stroke spark ignition engine that operates on heavy fuel such as JP-8 and synthetic diesel generated from natural gas, and attempting to establish a research project focusing on identifying best practices for the teaching of STEM classes, specifically thermo science. I have prior expert witness experience with consultation, deposition, and courtroom testimony.

Expert 507315 - AL AK AZ AR BC CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA QC RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I have more than 40 years of experience in all aspects of power plant engineering design, procurement, construction, operations, maintenance, testing, decontamination and dismantlement of both fossil and nuclear generating facilities both in the United States and internationally. I have developed design documents such as system descriptions, process flow diagrams, P&IDs, technical specifications for fluid systems included in power plants both fossil and nuclear. This work also included preparation of safety analysis reports and environmental impact assessments. While working for a public utility, I operated and maintained mechanical components and instrumentation in operating power plants, conducted performance testing of boilers and turbines and auxiliary systems in accordance with power test codes, and developed power plant life extension and availability improvement programs while participating in the implementation of such programs in operating power plants in the United States. I led a team of engineers that developed the concept of removing and replacing nuclear power plant steam generators by making a new construction opening in the containment shell. As Chief Nuclear Engineer I directed personnel performing containment pressure/temperature transient calculations, thermo-hydraulic and radiological analysis. At Chernobyl, I oversaw and managed the analysis and development of four early projects to stabilize the existing confinement structure, the radiological safety programs, characterize the radiation zones within the existing structure, evaluate the long terms waste management program, and the new safe confinement design that is being implemented. I have over 5 years of expert witness experience with consultation, deposition, and courtroom testimony.

Expert 513348 - ID

Expertise Description

I have more than 20 years of experience in the Aviation industry, and I am owner and Principal Engineer for a company that provides structural engineering and certification services to numerous companies within the industry. I have developed certification plans, loads reports, structural analysis reports, test plans, and test reports. I have delegated structural tests, coordinated conformity inspections, and reviewed design data for compliance. I am experienced in stress analysis using classical hand analysis methods.

Expert 508791 - AL MA

Expertise Description

I have more than 30 years of experience as a Mechanical Engineer with expertise in technical architecture. My experience includes a healthcare website application, with extensive technical interactions with the chosen system integrator. I also have experience with a human services data warehouse and on several web transactional application implementations. I have provided technical expertise, database knowledge, work scope estimation, document production, and project management advice. I have prior expert witness experience.

Expert 508739 - AL AK AZ AR CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I have been active in computational, theoretical, and experimental fluid mechanics for over 35 years with academic and governmental experience. Since 2010 I have been a Professor of Mechanical Engineering, before that I was a Research Mechanical Engineer at a research laboratory. My area of expertise is within fluid mechanics, more specifically, I have participated in a wide range of fundamental research areas such as: development of direct and large eddy simulation methods for turbulent flows, turbulent transport physics, air-sea interfacial dynamics and transport with special emphasis on the surface thermal (infrared) signature of breaking waves and subsurface turbulence, and surfactant effects on free surface flows. As well as, the first principles understanding of polymer drag reduction and riblet drag reduction, atmospheric boundary layer flows, turbulence modeling, hydroacoustics, physics of coastal and estuarine flows, applications of Karhunen-Loeve expansion methods to turbulence and to geophysical flows, infrared remote sensing, and aerosol physics. I have taught undergraduate courses in fluid mechanics, heat transfer, and strength of materials. At the graduate level I have taught courses in fluid mechanics, advanced fluid mechanics, and turbulence. In addition, I am currently a Principal Investigator on research funded by a foundation and also privately.

Expert 509188 - AL CA(S)

Expertise Description

I have more than 30 years of experience in building acoustics, MEP noise & vibration, architectural acoustics and environmental noise and vibration control engineering. I have been the principal investigator and project manager of numerous projects involving design-phase noise and vibration assessment for commercial and residential developments, luxury condominiums, multi-family housing, hotels, convention centers, television and recording studios, university library, theaters, indoor and outdoor sports and recreation facilities, community parks, and open-air stage production facilities. Project studies have included baseline analysis, reverberation assessment, and speech interference; sleep disturbance, environmental impacts, remote outdoor noise and vibration monitoring, propagation analysis, computer modeling applications, noise source identification in complex noise fields, and noise reduction requirements. I have over 15 years of expert witness experience with consultation, deposition, and courtroom testimony.

Expert 505631 - AL AK AZ AR CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I am a mechanical engineer, with over 40 years of experience in the field of internal combustion engines, specializing in diesel and natural gas engines and related technologies. I started my career in 1973 with a company where I gained valuable experience in engine design and development, before moving to the university sector in 1981. I developed research programs in diesel and natural gas engine technologies and taught bachelors’ and master’s courses in diesel engine technology, and advised graduate students at doctoral and masters levels in the field of internal combustion engine technology. In business, I have also managed the development of new technologies and innovation through small teams – processing to the leadership of a large global engineering organization with greater than 2,000 engineers. My leadership role in innovation and technology development, new product development and support has included managing resources and product development in both leading and emerging markets – most notably Brazil, India, and China. I was directly involved with almost every new engine and exhaust emission program from 1993 to 2014. These programs delivered successful engine designs with dramatic reductions of criteria pollutants, oxides of nitrogen (NOx) and particulate matter (PM) of over 98% to near-zero levels. I provided emission regulations promulgated by EPA and California. I have prior expert witness experience with consultation and deposition.

Expert 508582 - CT

Expertise Description

I have more than 35 years of experience in the field of Mechanical Engineering with expertise in industrial operation in radio, television, and home appliance manufacturing. My research focus is on time-delayed systems, vibration suppression techniques, nonlinear robust control of dynamic systems, and micromanipulation in cellular biology. I have over 20 years of expert witness experience with consultation and deposition.

Expert 508532 - NY

Expertise Description

I have more than 25 years in Mechanical, Electrical, Plumbing (MEP) forensics and design with experience in HVAC and fire suppression/protection systems. My expertise includes forensic investigations, building system performance issues, property loss consulting, engineering design, and building code expertise. I have over 10 years of expert witness experience with consultation and testimony.

Expert 508109 - FL

Expertise Description

I have more than 5 years experience in the automotive engineering sector with specific experience in the automotive manufacturing of both OEM components and full vehicle assembly / manufacturing. My Ph.D. research is on complex systems design and the development of computational representations and reasoning in design. I have worked on multiple sponsored projects funded by partners such as NASA, Michelin, and BMW. I currently serve as an assistant professor at a University where I work on a multitude of automotive and systems engineering projects.

Expert 19583 - NV

Expertise Description

I have more than 35 years of experience in the field of Forensic Engineering and Consulting with expertise in providing accident reconstructions and analyses of mechanics of the accident occurrence, associated Impact Biomechanics, Mechanisms of Injury, and Kinematics. I have determined relationships of associated claimed injuries to accident mechanics and have evaluated numerous Human Factors issues including warnings, lighting, perception-reaction processes, Impending lmpact Zone, and product designs. I have over 20 years of expert witness experience with consultation, deposition, and courtroom testimony.

Expert 507499 - OR

Expertise Description

I have more than 40 years experience in the field of Mechanical and Material Engineering with expertise in fluid dynamics and industrial energy utilization. My research has encompassed the mechanics of fishing equipment, including fishing rods and the design of fly-casting equipment for optimal performance. My experience also includes the examination of the simultaneous heat and moisture transport through building materials and structures, moisture conditions in microclimates, woodstove performance, the fundamental processes of heat and mass transfer during drying, HVAC system efficiency, intellectual property and patent matters. I have over 15 years expert witness experience with consultation and deposition.

Expert 506998 - FL

Expertise Description

I have more than 35 years of experience in the fields of Mechanical and Aerospace Engineering with areas of interest in jet and rocket propulsion systems, advanced low pollutant emission, high efficiency combustions systems for advanced aircraft and automotive applications, and alternative fuels and renewable energy systems. I have developed graduate level courses in computational fluid dynamics, graduate level courses in thermodynamics and fluid dynamics, and undergraduate courses in internal combustion engines, fluid dynamics, aircraft propulsion, compressible flow, numerical analysis and thermodynamics. I have experience with automotive engineering, turbomachinery, internal combustion engines, external aerodynamics, dynamics, mechanics of materials, non-destructive testing. I have over 20 years expert witness experience with consultation, deposition, and courtroom testimony.

Expert 506912 - TX

Expertise Description

I have more than 35 years of experience as a Mechanical Engineer with expertise in combustion, internal combustion engines, fuels, emissions, engine control systems, emissions control systems, and automotive engineering. I obtained my Bachelor's degree in Mechanical Engineering followed by three graduate degrees culminating in a PhD with a specialization in combustion. I joined as faculty of a Department of Mechanical Engineering where I established their combustion and engines research program. I have been involved in research in the area of combustion, engines, emissions, and alternative fuels for over 35 years. My research includes both experimental work and numerical modeling of both fundamental combustion processes and combustion within engines. My present research is focused primarily on the spark ignition process, modeling heavy-duty Diesel engines, and methods for improving fuel consumption for both light-duty and heavy-duty vehicles. I have over 20 years of expert witness experience with consultation, deposition, and courtroom testimony.

Expert 506781 - MD

Expertise Description

I have more than 60 years experience in the field of Mechanical Engineering with expertise in electronic packaging engineering for harsh military and space environments, acoustic engineering, optics, fiber optics, and laser technology. I have experience with accident reconstruction, and investigating engine failure, boating and marine accidents, breach of contracts and warranty, construction accidents, and construction contract compliance and contract claims. I have further experience with defective maintenance and products, fire origin and cause/burn injuries, machinery accidents, negligence, patent infringement, premise liability, railroad accidents and injuries, traffic controls, and underground utilities. My experience in product design, design for safety, and quality control for various products provides a comprehensive practical expertise background in addition to the technical expertise. I also have forensic engineering experience involving fracture failure of glass products such as beer bottles, whiskey bottles, a decorative vase, and shower doors. I have over 20 years expert witness experience with consultations, deposition, and courtroom testimony.

Generic Cialis pills

Expert 506559 - NC

Expertise Description

I have more than 20 years experience in the fields of Mechanical and Forensic Engineering with expertise in Fires and Explosions consulting. I have conducted more than 2,000 investigations ranging from small pipe ruptures to multi-million dollar industrial plant explosions. I have additional experience with mechanical and electrical systems, analysis of mechanical and electrical failures, and root cause investigations of boiler, turbine (steam and gas), pressure vessel and piping ruptures and explosions. I also have extensive experience in evaluations of damage to process facilities and power plants; estimating repair/replacement costs; analysis and technical investigations of residential, commercial and industrial accidents; analysis of design, fractures, corrosion and material properties; fire and explosion origin and cause investigations; evaluation of construction and heavy equipment, and; monitoring and analysis of radiation and/or contamination hazards. I have over 20 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 504791 - PA

Expertise Description

I have more than 10 years experience in the field of Mechanical Engineering with expertise in Fire Protection. I progressive engineering experience that includes elements of engineering management, fire protection engineering, mechanical engineering, code enforcement, and code consulting in the public, private, military and international sectors. I have performed special inspections related to fire sprinkler systems, fire standpipe systems, fireproofing, firestopping, fire resistant rated construction, HVAC systems, chimney/flue systems, energy conservation code related requirements, and final inspections.

Expert 505525 - KS

Expertise Description

I have more than 25 years experience in the field of Biological and Agricultural Engineering with expertise in product development of chemical application and control systems. I have experience with CAD design of mechanical and hydraulic systems, teaching and development of courses in the areas of Agricultural Processing and Mechanical Systems. I have supported integration of hydraulic, electric, and mechanical systems during prototype/production builds, as well as done packline audits for mitigation of fruit damage, and designed and prototyped mobile construction equipment utilizing horizontal directional drilling (HDD) technology.

Expert 348639 - CA(N)

Expertise Description

I have more than 45 years experience in the Mechanical Trades with expertise in Refrigeration, Heating, and Air Conditioning. I have experience with mechanical contracting, Mechanical Infrastructure, Thermodynamics, Commercial Refrigeration; Water Usage; Water Supply; Medium Temperature and Low Temperature, as well as Heating/Air Conditioning, and Ventilation. I have additional experience with boilers, hot water, and construction defect and standard of care. I have over 5 years expert witness experience with consultation, deposition, and court testimony.

Expert 503167 - CA(S)

Expertise Description

I have more than 30 years experience in the Tire industry with expertise in the wholesale and retail of tires. I have experience and knowledge of tire and wheel construction, tire installation and repair, effects of aging and low inflation pressure, tire pressure monitoring systems, wheel torque, tread patterns, and tire nomenclature. I have sold, repaired, and adjusted hundreds of makes of tires on most models of cars and light trucks including, motor homes, box trucks, off-road vehicles, heavy equipment and commercial light trucks. I have analyzed hundreds of tire failures to determine possible manufacturer defects, road hazard or customer misuse. I have prior expert witness experience.

Expert 459898 - AZ

Expertise Description

I have more than 35 years experience the field of Automotive Service and Repair with expertise as a Master Automobile Technician. I have experience with collision damage repair and paint refinishing, vehicle appraisal, mechanical breakdown, car failure, determination of cause of failure, lead returns, used care buyers inspections, condition reports, case and diminished value appraisals, and used vehicle inspection. I have over 15 years expert witness experience with consultations, depositions, and courtroom testimony.

Expert 503796 - NY

Expertise Description

I have more than 30 years experience in the Liquid Petroleum Industry with expertise in Offshore Petroleum Terminals. I have experience with liquid petroleum (crude, products) and gas (LNG, LPG) cargo handling and storage facilities, single point mooring (SPM), Multi-Buoy Mooring (MBM/CBM), and offshore cargo transfer systems (FPSO). I have additional experience with oil and gas pipelines, manifolds, pigging and PLEMs (land/submarine), and Military marine terminals and home-porting facilities. My specific areas of expertise are conceptual development, pipe flow and hydraulic analysis, pipe system stress analysis, stress and vibration, piping & pipe support design, pipeline on-bottom stability, pigging, prime movers, spill containment, spill booms and hazard analysis and risk assessment (HAZOP), vibration analysis & machinery diagnostics, and pipeline integrity and FFS assessment. I have over 15 years expert witness experience with consultation, deposition, and courtroom testimony.

Expert 29835 - CA(S)

Expertise Description

I have over 30 years experience with Accident Reconstruction and Safety. My accident and safety expertise includes: Sports and industrial injuries, Vehicular and equipment accidents- all vehicle types, pedestrians, component failures (e.g., brakes); Pedestrian – Slip, trip, fall, stairs, ramps, sidewalks, coefficient of friction; Premises – Building codes, lighting, glass, screens, electronic gates; Industrial & Construction Accidents – ladders, scaffolds, machine guarding, forklifts, construction vehicles, conveyors, belt conveyors, lifts, hoists; Mechanical fasteners – bolts, latches, welds; and Criminal cases – vehicular manslaughter, trade secrets. I have additional expertise in mechanics, applied mechanics, engineering mechanics, and biomechanics. I am experienced with pedestrian surfaces including walkways, stairs, and ramps, as well as slip and fall test methods, standards, and instrumentation. I have more than 20 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 173222 - CA(S)

Expertise Description

I have more than 25 years experience in the Trucking Repair Industry. I was a mechanic of a worldwide Hazmat producer and transporter for 2 years and Shop Foreman for 10. I am a heavy-duty truck and trailer mechanic who can troubleshoot, inspect and repair all aspects of truck and trailer systems, and engine management. I am also well adept at Cryogenic, HAZMAT, CO2 and L.N.G. plumbing and pumping repair, as well as Dot and Bit inspections. I have over 20 certificates of training in the repair of class 6 and class 8 vehicles. I have prior expert witness experience.

Expert 170752 - CA(N)

Expertise Description

I have over 20 years experience in automotive lighting, general lighting, and illuminating engineering. My expertise includes product design, technology development, testing, standards, and regulations for general lighting and automotive lighting. I have more than 5 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 169651 - AZ CA(N) CA(S) WA

Expertise Description

I have over 45 years of varied experience in commercial aviation with Aeronautical and Mechanical Engineering and management. My expertise includes engine and propulsion (development, alteration, noise attenuation, repair and maintenance. My additional expertise includes equipment purchases, FAA regulations, leasing, and insurance issues; accident investigation and failure analysis; and aircraft salvage and rebuilding. I also have experience in establishing and directing engineering, engine part counterfeit, maintenance, and alteration facilities. I have more than 35 years expert witness experience.

Expert 170265 - CA(N) CA(S) MI NY OH WI

Expertise Description

I have over 40 years experience as a Laboratory Director specializing in Automotive Lighting and LED technologies. I have an in-depth knowledge of all automotive exterior lighting equipment from inception, design, and manufacture, as well as the national and international regulatory requirements. I have an excellent understanding of existing automotive LED patents and have supported depositions and inquiries related to patent infringements and patent litigation. I have over 5 years expert witness experience.

Expert 107641 - CA(N) CA(S) CT FL ME MA NH NY NC RI VT

Expertise Description

I have over 30 years experience in Bio Medical / Engineering. My expertise includes finite element stress analysis, fracture mechanics, fatigue, failure analysis, fire and explosion analysis, explosion cause and origin, biomechanics, materials science, stress and vibration, and structural design and analysis. I have more than 25 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 128296 - CA(N) CT

Expertise Description

I have more than 25 years experience in Mechanical, Biomedical, and Forensic Engineering. I am also experienced in accident reconstruction including automobile, motorcycle, bicycle, pedestrian, railroad, marine, and aviation. My other areas of expertise are injury causation biomechanics, product / premises liability, engineering analysis / R&D, medical devices, and patent infringement. I have prior expert witness experience with consultations, deposition, and courtroom testimony.

Expert 169114 - NY

Expertise Description

I have over 40 years experience in the metal producing and rolling industry with arc furnaces, annealing furnaces, rolling mills, processing lines, and electrical substations. My areas of expertise include rolling mills, slitting lines, processing lines, annealing furnaces, electric arc furnaces, building maintenance, machinery maintenance, utility engineer, OSHA regulations, personnel safety, workplace safety, slips and falls, codes, industrial machinery, utility engineer, electrical substations, electrical engineering, mechanical engineering, forensic engineering, fire cause and origin, electrocution investigation, and construction accidents. I have more than 20 years expert witness experience.

Expert 128652 - VT

Expertise Description

I have more than 30 years of experience specializing in machine engineering and design. My expertise includes: machine / product design; adequacy of design; thoroughness of control of quality; guards, shields, interlocks, and reliability; human factors; information, instructions, and warnings; related accidents and their reconstruction; product liability; and patent disputes. I have additional expertise in home appliances, institutional equipment, power tools, lawn and garden / turf care equipment, industrial and off-road vehicles, agricultural equipment, and industrial / production machinery. I have prior expert witness experience with consultations, deposition, and courtroom testimony.

Expert 127972 - KY

Expertise Description

I have more than 40 years experience in engineering, manufacturing, and management, specializing in forensic engineering and accident reconstruction. My expertise includes: lifts, hoists, jacks, cranes, industrial machines, hydraulic equipment, tools, material handling, fork lifts, aerial work platforms, loaders, automotive lifts, and scissor lifts. I have additional expertise in product safety, product failures, product liability, testing, compliance with standards (American National Standards Institute (A.N.S.I.) and International Organization for Standardization (I.S.O.)), and compliance with regulations (Occupational Safety and Health Administration (O.S.H.A.), Environmental Protection Agency (E.P.A.), and Department of Transportation (D.O.T.)), and adequacy of warnings, instructions, and labels. My experience includes the development of explanatory exhibits and the preparation of evidence for trial. I have over 20 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 160956 - TX

Expertise Description

I have more than 30 years of experience in design, manufacturing, and equipment engineering, with an emphasis on equipment used in oil and gas field servicing. My expertise includes: triplex / quintiplex pumps and pumping systems; jet, batch, and recirculating mixers; cement / sand bulk handling systems; coil tubing injectors; carbon dioxide / nitrogen equipment; equipment packaging on trucks, trailers, skids, barges, and offshore installations; engine, transmission, and various drive train systems for pumps, vehicles, and auxiliary equipment; hydraulic fracturing; cementing; acidizing; blenders; cooling system design for engine, transmission, pumps, and hydraulics; hydraulic applications; open and closed loop circuits; truck chassis and trailer design; Department of Transportation (D.O.T.), Occupational Safety and Health Administration (O.S.H.A.), and environmental regulations; and wireline trucks. I have additional expertise in design, manufacturing, problem solving, improvement of existing equipment, fleet evaluation, equipment personnel training, and safety training. I have over 5 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 128394 - DC TX

Expertise Description

I have over 50 years experience as a Laboratory Director specializing in mechanical design engineering, with an emphasis in all phases of industrial equipment and machinery design, vibration, including fans, blowers, motors, generators, engines, couplings, gearboxes, dynamometers and rolling mills. My expertise includes: troubleshooting of aircraft gas turbine engines and accessories, auxiliary power units, rotary wing drive gearboxes and gear trains. My expertise also includes: various motors, blowers, and variable frequency drives as well as ship propulsion systems, including diesel and gas turbine engines. I have additional expertise in troubleshooting, machinery malfunctions and failures, and machinery accidents, including accidents leading to extensive property damage, injury, and death. I have extensive experience in the use of vibration as a diagnostic tool, as well as high speed rotor balancing. I have experience with planning and executing heavy machinery lifts, evaluations of reinforced concrete foundations, and evaluations of fabricated machinery support structures, advanced vibration analysis and applications. I have prior expert witness experience.

Expert 128615 - FL

Expertise Description

I have more than 50 years experience in mechanical design / operations with general building construction, residential construction, hospitals, commercial buildings, commercial architecture, warehouses, industrial construction, fossil / nuclear power plants, and utility distribution systems. My experience includes mechanical engineering, plumbing, HVAC, power, and utility mechanical systems. I have more than 15 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 128461 - TX

Expertise Description

I have over 35 years specializing in Fire Cause and Origin, Accident Reconstruction and Failure Analysis, with an emphasis in industrial and commercial accidents, vehicle accidents, tractor truck accidents and ECM download analysis, product equipment failure analysis. I am a Mechanical Engineer with experience in roof-mounted and package HVAC units in commercial and school buildings. My expertise includes: failure analysis of vehicle, appliances, tools, machinery, equipment, HVAC, industrial, commercial, oil field, marine, residential, piping/piping components/pressure vessel design/failure analysis; ANSI B31.1 & B31.3; ASME Sections I & VIII; slip, trip and fall/building code compliance/ADA compliance/premises liability. I have more than 15 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 128387 - PA

Expertise Description

I have more than 25 years experience in the field of Fire Scene Investigation with expertise in Mechanical Engineering, evidence inspection and examination, report preparation for investigations, electrical accident reconstruction, origin and cause of fire, forensic engineering and analysis of accidents, water damage events, and fires relating to a wide variety of incidents. I have prior expert witness experience.

Expert 107538 - FL

Expertise Description

I have over 50 years experience in electrical engineering and mechanical engineering. My expertise in heating, ventilating, and air conditioning (H.V.A.C.) systems includes: chilled water / cold storage / ice storage systems; cold storage refrigeration; campus-type heating / cooling; high rise chill water / heat pump / split systems; high-temperature hot water systems; industrial ventilation; laboratory air conditioning / ventilation; and variable air volume (V.A.V.) systems. My expertise also includes: building plumbing design / engineering; fire alarm / life safety facility systems; and fire sprinkler protection. I have additional expertise in electrical systems: closed circuit television (C.C.T.V.); computer network / telephone raceways; data communication / distribution; emergency power supply; intercoms; lighting (exterior, interior, parking lot, roadway); Master Antenna / Cable television (M.A.T.V.); power distribution; and clock, security, and sound systems. I have more than 20 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 96458 - CA(N)

Expertise Description

I have over 30 years experience in marine engineering and engineering management. My expertise includes: asset management; construction management / oversight; design review; electrical / mechanical infrastructure development / construction / monitoring; employee relations; engineering scheduling / oversight; facilities management (control systems, critical systems, critical facility solution, electrical / power distribution, fire safety, fire suppression, fuel, generators, H.V.A.C., plumbing, telecommunications, UPS systems); incident reporting; maintenance standards / procedures; Occupational Safety and Health (O.S.H.A.); project management; and technical support for component and integrated testing / commissioning. I have prior expert witness experience.

Expert 48690 - OR

Expertise Description

I have over 15 years experience as a mechanical engineer. My areas of expertise include: design (fire protection, H.V.A.C., plumbing, process piping systems); construction administration and commissioning services; and due diligence analysis. My experience includes apartments, commercial properties, condominiums, conference centers, hotels, industrial spaces, multi-use buildings, parking garages, residential buildings, restaurants, and townhouses. I have expert witness experience with consultations, deposition, and courtroom testimony.

Expert 107379 - CA(N)

Expertise Description

I have over 25 years experience in mechanical and materials engineering, specializing in failure analysis. My expertise includes: accident investigation / reconstruction; construction defects (plumbing / H.V.A.C.); failure analysis (building materials, communications equipment, consumer products, machinery, medical devices; pressure vehicles, vehicles); fatigue / fracture / corrosion of metals / plastics / fiber composites; materials engineering; mechanical engineering; modal vibration analysis; and stress analysis. I have more than 25 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 55763 - CA(N)

Expertise Description

I have more than 30 years experience in fire, fire suppression, arson, and related matters, investigating over 3,000 fire incidents. My expertise includes: arson; boat / marine fires; computer modeling; electrical engineering; evidence collection; fire cause / origin; fire investigations; fire prevention; fire safety; fire science; forensic studies; mechanical engineering; and wildland fires. I have over 30 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 96609 - WI

Expertise Description

I have over 40 years experience as a mechanical engineer specializing in safety and forensic engineering. My expertise includes: accident investigation / reconstruction; agriculture equipment / machinery; construction engineering / safety; consumer safety; forestry; human factors engineering: lawn / garden products; manufacturing; occupational safety audits / training; product design / liability / safety; and safety codes / regulations compliance. I have more than 30 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 96755 - MN

Expertise Description

I have many years experience as a practicing mechanical engineer specializing in intellectual property, personal injury, product liability, and professional malpractice. My expertise includes: agricultural equipment; automated control systems; chain saws; consumer electronics; digital electronics; electrical appliances; electronic games and toys; electrical fires; electric / gasoline engine power tools; electric utility power plants; ergonomics; forensic engineer; forensic engineering; hand tools; heating, ventilating, and air conditioning (H.V.A.C.) systems; industrial electronics; laboratory testing; leaf blowers; manufacturing equipment; manufacturing processes; medical devices; model designs; mowers; process control systems; quality control; railroad memorabilia; railway equipment; railway operations; regulatory compliance; safety interlocks; and water filtration systems. I have more than 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 96606 - IL

Expertise Description

I have over 35 years experience as a mechanical engineer with emphasis on safety and design analysis. My expertise includes: cost estimation; safety research; industrial accidents; product accidents / liability; machinery, mechanical components, and consumer products design and safety analysis; and on-site and laboratory accident investigations. I have additional expertise in: agricultural engineering; crane safety devices; farm machinery; forensic engineering; guardrail testing; ladders; power lines; press guards; trailer hitches and towbars; truck-mounted ladder racks; and wood railings. I have prior expert witness experience.

Expert 56034 - OH

Expertise Description

I have over 30 years experience as a mechanical engineer, specializing in thermal systems engineering, including industrial energy conservation, recovery, and all related processes and equipment. My expertise includes: industrial process improvement; cogeneration; power plant engineering; utility generation; code compliance; chemical / industrial processing; pressure vessels; fuels / combustion; boilers; furnaces; medical waste incinerators; and power piping. I have more than 25 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 55533 - CA(N)

Expertise Description

I have over 30 years experience as an Aeronautical / Mechanical Engineer specializing in fire physics, thermodynamics, combustion, and heat / mass transfer. My expertise includes: micro-gravity combustion; micro-combustion power generation; meso- and micro-scale combustion; self-heating, pyrolysis, and self-ignition of combustible materials; liquid fuel pool burning; smoldering and transition to flaming; ignition / fire propagation in solid and liquid fuels; wild-land fire propagation; and wild-land fire spotting through burning particles and embers. I have additional experience in explosions and accidental fires in vehicles, aircraft, commercial fires, wild land fire, residential / commercial buildings, and petro-chemical plants. I have more than 25 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 51934 - CA(S)

Expertise Description

I have over 20 years experience in mechanical engineering for product failure analysis, personal injury analysis, property loss, accident reconstruction, accident causation, equipment evaluation, systems evaluation, construction accidents, general industry accidents, project evaluation, and safety and maintenance procedures. I specialize in residential heating and cooling including: decorative fireplaces, space heaters, wood burning fireplaces, wall furnaces, forced-air furnaces, log lighters, air conditioners, and dehumidifiers. I have additional experience in residential ranges, water heaters, gas or wood-burning appliances, and barbeques, and commercial hot plates, water heaters and boilers, deep fat fryers, catering truck fryers, commercial ranges, and commercial quick disconnects for gas lines. My experience with consulting work includes: construction accidents; falls, including slips and trips; furniture defects; residential, commercial, and industrial appliances; printing presses; lawn and garden tools; woodworking equipment; power saws; hand tools; lifting equipment; elevators, escalators; scaffolds, ladders; and recreational equipment defects and failure. I have prior expert witness experience.

Expert 48394 - CA(S)

Expertise Description

I have over 40 years experience involving design engineering, project management, and construction management of industrial power generation, cogeneration, standby emergency power units, emergency diesel generators, and gas turbine generation systems. I specialize in analytical services relating to plant performance, monitoring, control, fuel processing, and safety. My particular expertise for projects involve industrial gas turbines, such as Allison 501/570 series in standby power and cogeneration applications, and for stationary power generation and marine propulsion using large diesel engines such as ElectroMotive Diesels in both diesel electric and diesel reduction configurations. I have experience in application and special project modifications of micro-turbines for power generation and Hybrid Electric Vehicle (HEV) applications. My special expertise includes interpretation of and conformance to codes and standards as applicable to power generation and marine propulsion fields, including NFPA-70 (National Electric Code), ASME, ASTM, ANSI, Code of Federal Regulations (CFR's). I have special training and experience in systems integration, Failure Modes & Effects Analysis (FMEA) and system level reliability analysis. I have more than 25 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 45644 - CA(N) NV

Expertise Description

I have more than 25 years experience as a mechanical engineer with design and analysis of complex transportation systems, project planning and implementation, and feasibility studies. My past transportation projects have included intercity, commuter, rapid transit, high-speed, and light rail systems, alternative and conventional fuel buses, Automated Guideway Transit (AGT), and Personal Rapid Transit (PRT). My transportation evaluation and planning studies have included detailed assessment of transit technologies and economic analysis of capital, operational, and maintenance costs. I have also performed business planning and diversification studies, competitive analyses, market research, and economic forecasting. I have over 10 years expert witness experience.

Expert 43022 - FL

Expertise Description

Ph.D., P.E. – Licensed Mechanical Engineer. Experienced in accident investigations and reconstruction, as well as, human factors and biomechanics. Machine design, consumer products, fire cause and origin. Licensed pilot with IFR rating; can provide aerial photography. Licensed commercial driver with tanker, hazardous materials, and passenger endorsements.

Expert 17847 - AZ CA(S) CO CT DE DC FL GA HI IL IN KY MD MA MN MS MT NV NM NY OH OR PA SC TX UT VA WA WI

Expertise Description

I have over 55 years as a mechanical engineer and safety professional. My expertise includes: the design of filters, swimming pools, marine fish / mammal areas, commercial and industrial filtration / water treatment systems, and analysis and reconstruction of aquatic accidents (spas, swimming pools, and natural bodies of water) involving codes and standards, construction, diving, drowning, slides, suction entrapment, lighting, operations, signage, and slips, trips and falls. I have more than 35 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 43224 - FL

Expertise Description

I have over 30 years experience in mechanical engineering. My expertise includes elevator inspector, vehicle accident reconstruction, low speed impact, product liability (ladders, chairs, elevators, hydraulic lifts, power tools, machinery etc.), slip, trip, and fall, and building and safety codes violations (stairs, rails, etc.). I have more than 15 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 43157 - CT MA NJ NY PA

Expertise Description

I have over 15 years in Mechanical Engineering, Accident Reconstruction, Biomechanics, and Safety. I have investigated more than 150 accidents including motor vehicle reconstructions (cars, airbags, seatbelts, trucks, motorcycles, pedestrians, bicycles, etc.), consumer products ( golf carts, power tools & ladders), slip/trip, rollovers, and falls and extensive experience creating computer simulations and 3D animations. I have more than 10 years expert witness experience.

Expert 43088 - CA(S)

Expertise Description

I have over 30 years experience as a Mechanical Engineer with strong design, program management, business development and manufacturing background. My Extensive experience in the management of new product development includes oversight of intellectual property, formation of multi-disciplinary teams, concurrent engineering and state-of-the-art techniques for quickly getting products to market. Specializing in Fasteners, Latching Mechanisms, Aircraft and other Vehicle Structures, Structural Analysis, Kinematic Analysis, Air Infiltration, Numerical and Nonlinear Finite Element Modeling, Metals Behavior, Products Liability and Personal Injury. I have more than 20 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 43017 - CA(N) CA(S) CT FL NY

Expertise Description

I have over 50 years experience in biomechanics, industrial and automotive accidents, as well as consumer product liability matters. I specialize in the analysis and reconstruction of low-speed impact and ladder accidents. I have an extensive background in mechanical, biomechanical, structural, transportation, and human factors engineering. My expertise includes: accident reconstruction, product liability, biomechanics, computer/video animation, mechanical, biomechanical, structural, electrical, transportation and interdisciplinary analyses, low speed impact, whiplash, seat-belt, airbags, slip/trip and fall, machine guarding, ladders, design and manufacturing defects, elevators and other lifts, structures, home and industrial products, sports equipment, playgrounds, construction, lighting, warnings, human factors, etc. I have more than 35 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 40621 - CA(N)

Expertise Description

I have 40 years experience in the pressure vessel and piping industry as a metallurgist, welding engineer, quality assurance manager, and consultant. I have experience with nuclear power, ASME boiler and pressure vessel code, welding, and quality assurance. I have more than 30 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 40237 - MD NJ NY PA WA

Expertise Description

I have 40 years experience in mechanical engineering including automotive, ambulances, electrical, medical devices, patent litigation, as well as combustion, fires and safety engineering. I have prior expert witness experience.

Expert 40226 - LA NM TX

Expertise Description

Mechanical and electrical engineer experienced in: design and testing; friction, corrosion and stress analysis; accident investigation and reconstruction; material and component failure analysis; stress and vibration; materials characterization and testing; electrical fires cause and origin investigations; product liability, reliability, and patent review; as well as, slip and fall, lightning, and electrocution.

Expert 40162 - AZ CA(N) CA(S) HI NM OR WA

Expertise Description

I have over 30 years experience in Mechanical Engineering. My expertise includes: injury biomechanics, orthopedic biomechanics, mechanical device failure analysis, mechanical design analysis, accident reconstruction, vehicle testing, and industrial and consumer product liability. I have prior expert witness experience with consultations, deposition, and courtroom testimony.

Expert 39824 - CA(S)

Expertise Description

I have more than 40 years experience in the field of Vehicle Appraisal with expertise in Aircraft, RV's, Machinery and Equipment, Petroleum Equipment, Refineries, Terminals and related equipment. I have experience with inspections and damage estimates for corporations, heavy equipment appraisal, insurance companies, and fiduciaries. I have additional knowledge of the automotive, aircraft, machinery and equipment, and petroleum industries. I have over 30 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 39125 - AZ

Expertise Description

I have over 35 years experience in mechanical engineering. My areas of expertise include semiconductors, HVAC systems, cleanrooms, process piping systems, energy management and control systems and refrigeration systems, boilers, chemical exposures, as well as chemical spills and damages. I have more than 30 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 34395 - CA(N)

Expertise Description

I have over 25 years experience in robotics, automated control system, and mechanical design. I have additional experience in digital and analog control, including special applications, such as aircraft control, smart products, pattern recognition, neural networks, and signal processing. My examples of notable designs include a highly articulated hand (spacesuits) recently being adapted for deep sea applications, and a walking gyroscope toy on the market in the mid 80s. I recently developed a reliable and low cost technology for converting human voice into musical instrument sounds in real-time, and licensed this technology to a major manufacturer. I have more than 15 years expert witness experience.

Expert 34369 - MO

Expertise Description

I have over 20 years experience as a ceramics engineer with hands-on knowledge of processes related to ceramics, glass, and fiberglass production, management, and marketing, including: natural gas / oxygen combustion systems for furnaces; burner hardware; forming processes; waste management strategies; nuclear waste vitrification; environmental abatement; corrosion testing; industrial gas production; and combustion technology. My expertise includes the automotive, bio-medical, defense, electronics, and nuclear fields. I have experience with previous expert witness analysis, investigations, affidavits, and testimony on combustion equipment, fractology examinations, industrial furnaces, industrial process engineering, and materials failure. I have more than 10 years expert witness experience.

Expert 33497 - CA(N)

Expertise Description

I have more than 35 years experience in accident reconstruction, automotive repair fraud, materials handling science, machinery and accidents involving motorcycles, ATVs, automobiles, trucks, busses, RVs, heavy equipment (tractors, farm machinery, bulldozers, etc.), towing, tire-related, marine, scooters, bicycles and skiing, as well as, education issues. I have experience with cases involving cars, trucks, buses, motor homes, motorcycles, trailers, bicycles, scooters, boats, ships, personal watercraft, ATV & tire failure analysis, fires, heavy equipment, race track design and safety, tools and equipment design and safety, and engineering management issues. My expertise also includes auto part counterfeit detection as well as aircraft, marine, engine, engine part counterfeit, and general manufacturing parts counterfeits. I have additional expertise in hybrid propulsion systems in cars, trucks, boats, yachts, ships, buses, and trains, as well as comprehensive experience in IP litigation for a major car company. I have over 35 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 33220 - CA(S)

Expertise Description

I have over 40 years experience in mechanical engineering. My experience includes design engineering and chief engineering for several companies and ownership of companies involved in fabrication of truck bodies, accessories, and construction equipment. I have more than 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 29294 - UT

Expertise Description

I have over 25 years experience in multi-industry design with a wide variety of products including mobile equipment, truck equipment, hydraulically operated machinery, auxiliary axles, exercise equipment, and molded plastic products. I have more than 15 years expert witness experience.

Expert 29068 - AL CA(N) CA(S) NV UT

Expertise Description

I have more than 30 years experience in mechanical engineering with emphasis on the development and improvement of a wide variety of products, including trucking equipment, refuse equipment, hydraulically operated mobile equipment, specialty axles and suspensions, exercise equipment, radio frequency and magnetically shielded enclosures, rotomolded containers, and a variety of consumer products. My areas of expertise include product design, concept generation, design, stress calculations, finite element analysis, modeling, prototyping, testing, manufacturing and assisting in the patent process. I have over 25 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 28192 - CA(S)

Expertise Description

I have over 40 years experience in industrial and mechanical engineering specializing in the aerospace, nuclear, shipbuilding, and computer industries. My areas of expertise include plant layout, material handling, crane failures, quality control, machine design, construction cost estimating, custom equipment design, and plant relocation. I have more than 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 27967 - GA

Expertise Description

I have over 30 years experience as a Registered Professional Engineer. My areas of expertise include the design, analysis, troubleshooting and failure analysis, turbomachinery and ancillary equipment, cogeneration of electricity, and performance improvement.

Expert 26495 - CA(N)

Expertise Description

I have over 30 years experience in mechanical engineering. My areas of expertise include equipment failure analysis, combustion equipment, heat transfer, fluid flow. I have more than 25 years expert witness experience.

Expert 26478 - WA

Expertise Description

P.E. – Consulting expert with more than 35 years' experience in the field of mechanical engineering as a machinist and assembly mechanic. Has designed and put into operation mining and construction machinery, inspection and test equipment, automated production machines, and materials handling devices.

Expert 23327 - ME

Expertise Description

I have over 30 years experience in engineering specializing in the design and analysis of products and capital equipment. I have led the development of products and machinery for manufacturing compact discs, CD-R's, DVD's and other optical media. I specialize in design and failure analysis, as well as accident investigation relating to products and machinery. I have more than 10 years expert witness experience.

Expert 20630 - CA(N) CA(S) FL GA IL IN MI NY PA SC TX WA WI

Expertise Description

I have over 30 years experience in packaging, can seaming, packaging line systems, package design for product protection, evaluatation of package specifications, automation for packaging, and packaging forensics. I have more than 25 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 20354 - CA(S)

Expertise Description

I have over 40 years experience in metallurgical engineering issues. My areas of expertise include: scanning electron microscopy, fracture mechanics, metallurgical tests and techniques. I have investigated consumer product failures including turbine/heat exchanger failures, glass failures, metal and plastic chair failures, composite poles, ski-boots, chains, seatbelts, ladders, piping defects, and tires. I have more than 35 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 19579 - TX

Expertise Description

I have over 45 years experience in mechanical engineering with expertise in heat transfer, fluid dynamics, thermodynamics, materials, structures and instrumentation. My specialties also include cryogenics engineering and hydraulics, pneumatics and thermal management systems. My accomplishments include having conceived and developed a large hydrogen calorimeter test laboratory for Space Shuttle developments and aircraft thrust reverser concept for fighter aircraft.

Expert 17897 - CA(N)

Expertise Description

I have more than 50 years experience in the field of mechanical engineering. My areas of expertise include construction safety and inspection, industrial/manufacturing safety, training programs, personal injury/property, material handling equipment (hoists, cranes, rigging, lifts, etc.), accident reconstruction, plant machinery and equipment, hazardous waste controls, undersea oil and mining, and forensic investigation. I have more than 10 years expert witness experience.

Expert 17762 - CA(S)

Expertise Description

I have 40 years experience as a civil and mechanical engineer and environmental assessor. My areas of expertise include asbestos, facility assessments, lead, radon, underground tanks, stormwater, landfill siting / design / monitoring, and soil, building assessment, soil sampling, and groundwater sampling. I have prior expert witness experience.

Expert 17747 - CA(S)

Expertise Description

****Expert 17747 is no longer available****
I have over 30 years experience in mechanical engineering in the industrial and manufacturing sector, including over 15 years experience in the design of machinery, manufacturing processes, and product design. My experience includes all levels with industrial equipment from hand tools, to operating large punch presses, to printing presses, and to the design of ultra-precision micro-inch accuracy optical lathes. I have 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 9750 - CA(S)

Expertise Description

I have 45 years experience in conducting engineering and analytical studies of the design and performance of automotive and aviation occupant restraint systems and components. I am also knowledgeable in the influence of automotive and aviation systems on occupant kinematics during accidents, integrating input from accident reconstruction experts, biomechanical engineers, medical records, and personal inspections and testing in determining compliance with applicable Federal Motor Vehicle Safety Standard (FMVSS).

Expert 9030 - CA(N)

Expertise Description

I have over 30 years in Mechanical Engineering. My experience includes: failure analysis of mechanical systems; accident investigation and reconstruction; human factors and ergonomics; safety design reviews and failure prevention methods; automation; robotics and microprocessor application; and warnings and safety information analysis and development. I have performed a wide range of work in the area of tire, wheel, and brake systems. My work includes numerous inspections, testing, failure analysis, accident reconstruction, and employee training on tires, wheels, and brakes related to trucks, passenger vehicles, motorcycles, off-road vehicles, recreational vehicles, and golf cars. I have conducted surveys and performed risk analysis related to tires, wheels, and brakes. I have prior expert witness experience with consultations, deposition, and courtroom testimony.

Expert 9027 - CA(N)

Expertise Description

I have more than 30 years experience in the field of Mechanical Engineering. My areas of expertise include failure analysis and design of consumer products and industrial equipment: pressure vessels, heat exchangers, valves, piping, general machinery, frame and structural components, compressors, pumps, turbines, ladders, chairs, bicycles, automobiles, trucks, railcars, and aircraft components. My specialties include: True color 3D Laser and Structured Light scanning documentation of small parts, vehicles (e.g. crush), equipment, and accident and crime scenes. My experience also includes preserving evidence digitally, measuring parts, and comparing vehicle crush. My additional expertise includes computer simulation and animation, 3D fly around, video, photographic and poster board presentation, and engineering technical services, as well as extensive experience in industrial equipment injuries and failures, including fans and other rotating machinery. I have over 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 8950 - CA(S)

Expertise Description

I have over 30 years experience as a Mechanical and Safety Engineer and have served as a consultant in accident analysis and reconstruction and product liability. My experience includes accidents involving trucks, semi-trucks, motorcycles, bicycles, automobiles, and pedestrians. My casework has included multiple car/bus and semi-trailer accident, semi-trailer/pedestrian fatality, vehicle rollover with fatality and potential product liability, four-car rear-end accident and others. I have prior expert witness experience.

Expert 8925 - CA(S)

Expertise Description

I have over 55 years experience as a biochemistry and in mechanical engineering issues. My areas of expertise include: mechanical design, biomechanics, human factors engineering, mechanical behavior of materials, accident reconstruction, manufacturing issues. I have 45 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 8902 - AZ CA(S) NV

Expertise Description

I have over 30 years experience in mechanical, plumbing, and fire protection engineering and construction issues. My areas of expertise include heating, ventilation & air conditioning, energy conservation, hot & cold supply systems, plumbing & drainage systems, roof drainage systems, process cold water & hot water systems, fire sprinkler & standpipe systems, fire suppression systems, fuel oil systems, and Title 24 calculations. I have more than 15 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 8858 - CA(N) CA(S) NV OR WA

Expertise Description

I have over 30 years experience in design, field engineering, and construction and project management in power and industrial plants and heavy construction. My expertise includes construction contract formation and administration, development, and analysis of claims and construction problems including delays, errors and change orders, terminations, etc. I have specific experience in design and construction of electric power plants and industrial boilers including steam and combined cycle turbines, piping, valves, hydraulics and thermal problems, pumps, heat exchangers, and similar equipment. I have more than 20 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 8803 - CA(S)

Expertise Description

I have over 35 years experience in metallurgical and materials engineering. I have experience offering in-house analytical services related to characterization of advanced metallic, nonmetallic, ceramic, and composite materials, including metals, rubber, fiberglass, ceramics, and plastics. My areas of expertise include: product liability, personal injury, and patent infringement cases, as well as, failure analysis involving: general corrosion, wear, and mechanical issues; surface characteristics; product development and design; automotive failures (axles, springs, tires, engine components), welds, plumbing / piping, medical devices, chairs / furniture, industrial hardware and machines, construction defects, bicycle accidents, paint analysis, gas and propane explosions and fires, and food contamination issues. I have 35 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 8841 - AZ CA(N) CA(S) KY LA NV OH

Expertise Description

I have over 35 years experience in building, plumbing, HVAC, fire sprinkler systems, fire suppression system, industrial piping systems for processes and lab systems. My areas of expertise include retail, residential, office, industrial buildings, college campuses, medical on comfort cooling, clean rooms, and industrial air conditioning. I have more than 5 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 435766 - FL

Expertise Description

I have more than 15 years experience in the field of Transportation Engineering with expertise in Forensic Engineering. I have experience with vehicle collision reconstruction, commercial vehicle crash investigation and analysis, highway work zone traffic control safety, roadway design and traffic control devices, vehicle system components and dynamics, and driver factors and transportation safety statistics. I have ongoing transportation safety research and my international safety policy consulting have resulted in many peer-reviewed publications and presentations at technical conferences and professional forums around the world. I have over 15 years expert witness experience with consultation, deposition, and court testimony.

Expert 501656 - AL AK AZ AR BC CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA QC RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I have more than 40 years of worldwide experience in refrigeration as well as mechanical and overall building design, analysis, engineering, and project management of new and renovated facilities. I am recognized as an international expert in refrigeration engineering, refrigerated warehouses, engineering investigations. and food processing and have published and presented papers as an industry expert on topics that include plant design, refrigeration systems, building evaluation, sanitation, and energy conservation. I have acted as an expert witness for refrigeration, refrigeration controls, refrigerants, refrigerated buildings, meat and food refrigeration, cold storage facilities, and food processing cases. I have over 10 years expert witness experience with consultation, deposition, and courtroom testimony.

Expert 500117 - CA(N)

Expertise Description

I have more than 15 years experience in the field of General Contracting with expertise in HVAC service. I have experience with refrigeration and HVAC installation, troubleshooting, repair and maintenance. I have additional experience with tenant improvement, build-outs, and ground up structures, repairs and building maintenance, experienced in on-site construction management. I have prior expert witness experience with consultation, deposition, and courtroom testimony.

Expert 501643 - CA(S)

Expertise Description

I have more than 40 years experience in the field of Forensic Engineering with expertise in Naval Engineering and Gas Turbine Engines used as prime movers. I have experience with engine management, operations and maintenance of diesel engines, firefighting equipment operations and their installation; engine exhaust emission control devices and systems testing including diesel, natural gas, dual fuel (diesel and natural gas), and gasoline fueled engines. I have over 20 years expert witness experience with consultation and deposition.

Expert 500045 - IA

Expertise Description

I have more than 20 years experience in the field of Physics Engineering with expertise in electromagnetics, nanoparticle materials, engineering investigations, and the area of materials characterization. I have experience with eddy-current and magnetic nondestructive evaluation; electrical and magnetic sensors, embedded sensors, antennas and electronics, and characterization of thin layers and surface treatments using high-frequency electromagnetic techniques. I have over 5 years expert witness experience.

Expert 463927 - NJ

Expertise Description

I have more than 10 years experience in the field of Mechanical Engineering with expertise in Medical Device Design. I have experience with Mechanical/Process Design, Material Science, and Biomedical Engineering. I am skilled in Design/CAD, Hazard Analysis, Testing/Analysis, in-vitro/ in-vivo biologic testing, and Patent/Regulatory submissions. I have additional experience with root cause failure analysis and custom data analysis programs.

Expert 17912 - CA(N)

Expertise Description

I have many years experience in Mechanical and Metallurgical engineering. My areas of expertise includes: Materials Science engineering; Failure analysis of mechanical systems and metal components; Failure analysis of engineering materials; Accident investigation, documentation, and reconstruction; Human factors engineering; Automotive, truck and trailer engineering; Gears and drive-train components; Motorcycles and all-terrain vehicles; Bicycles; Helmets and personal safety equipment; Machine design and safety; Hydraulic and pneumatic components and systems; Construction equipment; Hand, power and machine tools; Welding; Medical equipment; Firearms; Consumer products; Instrumentation and testing. I have more than 30 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 326558 - CA(N)

Expertise Description

I have more than 30 years experience in the field of Mechanical and Forensic Engineering. My areas of expertise includes: Failure analysis and design evaluation of mechanical systems, components and mechanisms; Product design liability analysis for consumer products, industrial equipment and machinery; Product design, review and evaluation, engineering R&D, product and process operation issues; Stress analysis and fatigue; Intellectual properties and patents; Patent claims review, infringement, prior art; Inventive problem solving techniques; Complex product development and strategies; Design methods and methodologies; Reverse engineering; Product improvements and modifications; Disruptive technologies; Motor vehicle and machinery accident investigation and reconstruction; Collision analysis and damage assessment; Rigid body dynamics, vehicles crashworthiness and rollover; Industrial heavy equipment and components, heavy trucks and trailers; Consumer and industrial products and devices; Tools, machinery, vacuum and capital equipment; Slip and fall accidents; Tibology and contact mechanics; Friction and wear tests and analysis; Safety design review and study of surfaces, materials and contact conditions. I have prior expert witness experience.

Expert 389076 - RI

Expertise Description

I have more than 35 years experience in the field Mechanical Engineering with expertise in design and analysis, inspections and auditing of piping, pipe supports, pressure vessels and other structural and mechanical components. I have experience with maintenance and field engineering for performance enhancement of piping systems including high energy steam, vacuum air systems for sludge removal, HVAC, air and vacuum handling systems, buried piping and seismic qualification in accordance with ASME, ANSI, AWS, API and NRC requirements. I have over 25 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 355726 - CA(S)

Expertise Description

I have over 40 years experience as an Engineering Physicist, specializing in mechanical, structural and electrical engineering, as well as vehicle and fluid dynamics. I have experience in the failure analysis of products, such as structures, vehicles, mechanisms, control systems, fluid dynamics, and electromechanical systems. My expertise also includes accident reconstructions, business plans, and insurance claim evaluations. I have more than 40 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 385970 - CA(N)

Expertise Description

I have over 35 years experience in diesel fuel systems. I have experience with design, specification, installation, startup, commissioning, troubleshooting, project management and inspections of diesel fuel systems for emergency backup generators and boilers. My areas of expertise also include pipe sizing, pump sizing, pump flow calculations; vent sizing; pressure calculations, overpressure alarms and sequences of operations, and back pressure devices.

Expert 462716 - IA IL IN MI MN

Expertise Description

I have more than 30 years experience in the fields of Product Design and Failure Analysis with expertise in the manufacture of the subject part. I have experience with analyzing the physical stresses that arise in a product under various loading conditions, and in determining if the design is sufficient to survive such loads, and investigating product failures and accidents analysis from a fundamental engineering perspective, often applying finite element analysis. I have provided consulting experience in the energy, construction, industrial, thermal fatigue, medical, transportation, crane failures, marine, commercial, utility and residential industries. I have over 15 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 460216 - AL AK AZ AR BC CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA QC RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I have more than 45 years experience in the fields of mechanical, environmental, and civil engineering with expertise in hydroelectric power and shipyard engineering. I have experience with design, procurement, installation and testing of hydraulic turbines; as well as fish screening systems, hydropower, performance testing, and energy efficiency. I have over 5 years expert witness experience with consultations and deposition.

Expert 349121 - CA(N) CA(S)

Expertise Description

I have more than 30 years of experience in mechanical engineering with expertise in the built environment. I have experience in large, technically demanding projects for advanced technology, health care, airport engineering, air infiltration, higher education, government, commercial and residential facilities. I have additional “hands-on” experience with the design, construction and operation of a wide array of extremely complex mechanical installations including process and manufacturing plants. I have over 5 years expert witness experience with consultation, deposition, and courtroom testimony.

Expert 455522 - DC MD OK VA

Expertise Description

I have more than 20 years experience in the field of Forensic Engineering with expertise in failure analysis of tanks, fire protection, plumbing, HVAC, and pumps. I have additional experience with HVAC & plumbing systems, pumping systems, appliances, construction sites, fire protection systems, flooding, fuel oil tanks, lightning strikes. I have over 20 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 444582 - CA(N)

Expertise Description

I have more than 7 years experience in the field of Materials Science with expertise in failure analysis of consumer, industrial and biomedical products, material testing and characterization, metals, stress analysis, corrosives, electron scanning microscopy, destructive testing, mathematical modeling, nondestructive testing, and tensile strength. I have knowledge of Atomic Force Microscopy, Vibrating Sample Magnetometer, Rutherford Backscattering Spectrometry, X-Ray Diffractometry, X-Ray Florescence, Scanning Electron Microscopy, Transmission Electron Microscopy, and Energy Dispersive Spectrometry. I have over 5 years expert witness experience.

Expert 452009 - CO

Expertise Description

I have 15 years experience in the field of Vehicle Design and Engineering, with specialized knowledge in accident reconstruction and product failure. I have additional knowledge with casting, forging, vehicle design, stamping, machining, vehicle dynamics, performance, time-space relationship, driver/rider reactions, occupant kinematics, human factors, and visibility analysis. I have been an expert witness for over 5 years with experience in consultations, deposition, and courtroom testimony.

Expert 167051 - WA

Expertise Description

I have more than 40 years experience in the field of Mechanical Engineering with expertise in providing product commercialization support to companies in the medical device, pharmaceutical, drug, biotech and cosmetics industries. I have additional knowledge in patent infringement, trademark infringement, trade dress infringement, product liability, personal injury malpractice, and contracts. I have over 15 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 453823 - CA(S)

Expertise Description

I have more than 5 years in the field of Mechanical Engineering with expertise in failure analysis investigation, root cause analysis, microscopic examination of failed surfaces, mechanical testing, stress and vibration, materials characterization, and fractography analysis. I have prior expert witness experience.

Expert 392387 - MA

Expertise Description

I have more than 20 years experience in the field of Mechanical Engineering with expertise in metering solutions, data management solutions, energy engineering support, and commodity procurement and risk management.

Expert 448488 - FL

Expertise Description

I have more than 20 years experience in the field of Information Systems and Operations Management with expertise in RFID, Artificial Intelligence (A.I.) and Expert Systems, Machine Learning and Data Mining, Business Intelligence, Cryptography, Simulation, Database Management, Supply Chain Management, CRM, Computer Integrated Manufacturing, eCommerce, Financial Credit Scoring, Economic Models, and Workflow Management. I have additional knowledge in information discovery, healthcare informatics and data, decision support systems, and simulation, as well as being highly familiar with inventory management, technology regulation, online product reviews, organization computing, cryptographic authentication, prediction of web traffic, telecommuters, back-propagation, sensor-enabled smart cards, input data selection, cybertrust, electronic payment fraud, eManufacturing systems, eCommerce applications, and genetic algorithms.

Expert 450402 - NY

Expertise Description

I have more than 20 years experience in the field of Mechanical Engineering with expertise in Electronic Engineering, Speaker Recognition and Signature Recognition software engines; Biometrics, Pattern Recognition and Internet-Commerce, Kinematic Analysis, and Applied Signal Recognition and Classification. I have prior expert witness experience.

Expert 9071 - CA(N)

Expertise Description

I have over 35 years experience as a mechanical engineer specializing in issues of bicycle safety. My areas of expertise include national guidelines for the construction of bicycles and bicycle facilities; bicycle industry; and transportation, technical and safety issues. I have prior expert witness experience.

Expert 17761 - CA(S)

Expertise Description

I am experienced in pipeline engineering issues, having over 35 years of experience. My areas of expertise include: gas and liquid pipelines, pipeline integrity, pipeline hydrostatic testing, and failures of pipelines. I also have experience with compressor stations, pump stations and equipment such as pumps, compressors, and gas turbines. I have more than 25 years of expert witness experience with consultations, deposition, and courtroom testimony.

Expert 430142 - AL AK AZ AR CA(N) CA(S) CO CT DE DC FL GA HI IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I have over 35 years experience in the field of Mechanical Engineering. My extensive experience includes engineering assessments, claims investigations, litigation support, high pressure steam boilers, gas, oil coal and refuse fuel burners, air systems, turbines and rotating equipment, and HVAC. I have prior expert witness experience with consultations, deposition, and courtroom testimony.

Expert 435823 - CA(S)

Expertise Description

I have more than 35 years of experience in the field of Mechanical Engineering and Quality Assurance, including years Hard Hat Commercial Diving experience with Naval work, Bridges, Piers, Marinas and overseas Subsea pipeline projects. Experience further includes forensic cases involving defecting construction, both topside and underwater with special training in Nuclear Physics, Welding Inspections, Destructive and nondestructive Testing Techniques, Nuclear Power Plant Equipment Inspection,Underwater Welding, Underwater Salvage, Demolition, Crash Testing, Commercial, Vehicle Dynamics, Death Investigations, Acceleration Values, Braking, Rotating Equipment for Turbines, Pumps, Compressors, Expanders, Motors. I have over 15 years of expert witness experience with consultations, deposition, and courtroom testimony.

Expert 407180 - CA(N) CA(S) FL

Expertise Description

I have over 35 years of experience in the field of Aviation Operations. My expertise includes engineering investigations, mishap and accident investigation, aviation safety, air traffic facilities management, engine management, aviation meteorology, commercial pilot, flight instruction, airframe and aircraft hydraulics, mechanical engineering, aircraft power plant engineering, and power generation gas turbine engineering. I have prior expert witness experience.

Expert 426397 - AL AK AZ AR BC CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA QC RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I have over 30 years experience in the field of Mechanical Engineering. My extensive experience includes engineering investigation, failure analysis, product liability, intellectual property, manufacturing, accident investigation and reconstruction, fire cause and origin. My additional vehicle experience includes commercial vehicles, automobiles, RVs, buses, trains, agricultural, and construction equipment. I have prior expert witness experience.

Expert 435826 - FL

Expertise Description

I have over 35 years experience in Mechanical Engineering. I have extensive experience in accident investigations and reconstruction, as well as human factors and biomechanics. My expertise includes machine design, consumer products, crash investigation and reconstruction, injury causation auto rollover bicycle / auto car / truck vehicle under rides semi tractor-trailer semi tractor trailer / car highway obstruction highway calming device traffic circle speed bump speed hump locomotive / truck motorcycle / car motorcycle / truck occupant ejection rear impact auto crash restraint systems truck rollover truck / school bus unrestrained occupant interior kinematics biomechanics, component design and failure analysis, medical devices, human factors engineering aircraft fuel system amusement ride, ANSI A92.3, personnel lift, fire and explosion cause and origin, hazardous materials management, emissions, air transport, and chemistry acid.

Expert 323300 - TN

Expertise Description

I have over 25 years experience as a mechanical engineering designing and maintaining HVAC, plumbing, piping, and sprinkler systems. My expert witness specialization includes HVAC, plumbing and sprinkler systems, construction defects, design errors, failure analysis of mechanical equipment, gas appliances, and hot water scalding. I have more than 5 years expert witness experience.

Expert 426384 - MD

Expertise Description

I have more than 35 years experience in the field of Engineering Mechanics. My experience includes the general areas of experimental mechanics, fracture mechanics, fatigue, dynamic material response, engineering investigations, and electronic packaging. My research is directed toward assessing, mitigating, and managing risks associated with the design, manufacture and fielding of electronic products and systems; practical approaches for microelectronic package design; and reliability prediction methodologies. My expertise includes vibration life tests, electronic assemblies, industry microelectronics, optical fibers, and thermal stress. I have over 35 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 426185 - CA(N)

Expertise Description

I have more than 35 years experience in the field of Reliability Consulting. My experience includes mechanical engineering, reliability methods and models, and arrays of inexpensive disks. I am highly familiar with probability calculation, common cause of failure susceptibility, reliability prediction and assessment for electronic systems and equipment, and disk drive equipment manufacturing.

Expert 403835 - NY

Expertise Description

I have over 40 years in the Materials Science and Engineering Industry. My extensive experience includes development of materials as it relates to the electronic, communication, security, transportation, aircraft, and environmental and civil infrastructure industries. I specialize in mechanical engineering, in relation to thermal management, smart materials, composite materials; aerospace engineering, specializing in the areas of electronic packaging and sensors; civil engineering, with specialization in concrete; chemical engineering, in the areas of fuel cells, batteries, activated carbon, and filter membranes; metallurgical engineering, and electrical engineering. I have more than 15 years expert witness experience.

Expert 149592 - CA(S)

Expertise Description

I have more than 40 years experience in Engineering and Medical Devices. My areas of expertise consists of hydroculators, moist heat pads, thermal cooling pads and cooling apparatus; laser and thermal hair removal devices, dermabrasion equipment; luggage and costume jewelry; patient beds, transport gurneys; failure of Pilates exercise devices; surgical staples; surgical fluid warmers; pedicle screw failure; absorbable shoulder tacs; suture failure; chiropractic devices; dental burr and drill failures; defibrillator mechanical design issues; surgical laser power cord design reliability, and much more. My additional experience includes engineering and management focused on research and development, design, and manufacturing in the medical device, packaging, toy, consumer product, and aerospace industries. My responsibilities have ranged from original product conception through high volume manufacturing, including plastic extrusion, injection molding, assembly, decorating, labeling, and packaging. I have experience with FDA requirements and Good Manufacturing Procedures (GMP’s); producing prototype models; performing computer aided plastic part design (SolidWorks) and failure; and hazard analysis including Failure Mode Effects Analysis (FMEA). I have over 10 years expert witness experience.

Expert 353324 - WA

Expertise Description

I have more than 20 years experience in the field of Mechanical Forensic Engineering specializing in operating and maintaining US Navy ships. My expertise includes analytical and investigative work in a broad range of shipboard and industrial mishaps, equipment failures, crane failures, underwater inspections, crane and rigging accidents, diving life support systems re-entry control, vessel flooding, tag-out / lock-out procedures, industrial environmental health and safety surveys, dry-dock engineering, and explosion analysis. I have prior expert witness experience.

Expert 325116 - CA(S)

Expertise Description

I have more than 50 years experience in the field of HVAC (Heating, Ventilation, and Air-conditioning) and Plumbing. My expertise includes general engineering, general construction, boiler, hot-water heating and steaming, electrical, fire protection, warm-air heating, ventilation & air conditioning, plumbing, sanitation systems, water conditioning and hazardous substances removal and remedial certification in individual residences, multiple housing, commercial, institutional, manufacturing and light industrial. I have over 30 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 46054 - NV

Expertise Description

I have more than 30 years experience in the field of Mechanical Engineering, including systems design and engineering. I provide services to commercial, industrial, institutional, governmental and educational organizations, and the casino / hospitality industries in the areas of mechanical, plumbing, life safety systems engineering, refrigeration, as well as, heating, ventilation, and air conditioning (HVAC). I have over 15 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 27115 - CA(N)

Expertise Description

I have more than 15 years experience in mechanical engineering with a focus on design and failure analysis (failure of bolts and bolted connections to dynamic stability of scissors lifts and excavators to mechanical failure of hydraulic system components to mechanical behavior of industrial equipment), engineering research (detailed studies of the flange stress response, creep behavior of longitudinally welded pipes at high temperature, design of structural supports for a cryogenic superconducting MRI machine, design review of medical implants, dynamic analysis of multistory manufacturing facilities, and frequency analysis of silicon wafer fabrication components), Finite Element Analysis (simple two dimensional linear elastic analysis of pressure vessels to complete three dimensional nonlinear analysis of a bolted engine connecting rod and full contact dynamic analyses of crane clutch components), Accident Reconstruction and Crash worthiness, and Mechanical Testing. I have extensive experience in industrial equipment injuries and failures, including fans and other rotating machinery. I have over 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 382459 - CA(S)

Expertise Description

I have more than 15 years experience in the field of Mechanical and Aerospace Engineering with a focus on Control systems and dynamics. My applied research in control theory includes nonlinear control, adaptive designs, distributed parameter systems, automotive / aerospace systems, energy storage, biotechnology, stochastic nonlinear systems, partial differential equation (PDE) control, delay systems, model-free optimization / extremum seeking, and other industrial collaborations. I have experience with control problems with aerodynamic drag reduction, fusion reactors, magnetohydrodynamic instabilities in plasmas, internal combustion engines, and source seeking for autonomous vehicles in GPS-denied environments. I also have experience with blade-vortex interaction on helicopter rotors, and control of satellites, underwater vehicles, and biological / chemical reactors. I have prior expert witness experience.

Expert 367890 - AL AK AZ AR BC CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA QC RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I have over 25 years experience in mechanical engineering with expertise in the design and project management of award-winning products for the medical, aerospace, amusement parks, medium and heavy industry fields. I am a detail-oriented professional with extensive expertise in all aspects of product design, from definition and analysis through conceptual design, drawings, presentations, fabrication and customer satisfaction. I have over 10 years expert witness experience.

Expert 321290 - FL GA NC OH

Expertise Description

I have more than 15 years experience in the field of Engineering, specializing in land transportation. I perform analysis of automotive, truck, motorcycle, and mechanical systems. My consultations further include investigation, documentation, and analysis of vehicle incidents, pipe systems, tire failures, vehicle accidents / crashes, vehicle fires, and mechanical failures to determine causation. My services consist of vehicle maintenance / repair, machine guarding, and rechargeable cell manufacture / design. I also have experience with assembly-line machinery, energy usage database production / management, HVAC systems, and environmental site / hazardous waste site remediation. I have over 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 49097 - AZ CA(N) CA(S) FL MT NM OR TX VA

Expertise Description

I have over 15 years experience in the fields of engineering, management, and consulting for significant projects in the semiconductor, university, laboratory, and advanced technology market sectors, worldwide. My additional consults include several hundred tool-install, wafer fab construction, process systems, process piping, and HVAC projects. I have 10 years expert witness experience.

Expert 17705 - CA(S)

Expertise Description

I have over 55 years experience as a mechanical engineering. My areas of expertise include: plumbing, process piping, storm drainage, irrigation, heating, ventilation, air conditioning, fire protection, energy conservation, plumbing, HVAC product design, plumbing engineering, and sewage. I have more than 40 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 12249 - CA(N)

Expertise Description

I have over 40 years in aviation accredited investigation, reconstruction and failure analysis. My areas of expertise include evaluation / analysis of aviation safety problems (including airport operations) and accident factors such as pilot error, air traffic control, human factors, weather, engine, flight preparation, aircraft & engine maintenance & engine management; records, aircraft structures & systems, investigation procedures & deep water investigation technology, and manuals & checklists. I have prior expert witness experience.

Expert 343027 - KY TX

Expertise Description

I have more than 20 years experience in Mechanical Engineering. My expertise includes force reconstruction of low-damage impacts, time-distance studies, vibration, analysis of photographic evidence, and three-dimensional reconstruction using photogrammetry or videogrammetry. I have general expertise in all types of applied mechanics or engineering mechanics problems. I am capable of non-ballistic trajectory analysis and failure analysis of ladders and other similar structures. I have additional experience in corrosion, accident analysis, kinematic analysis, mechanics, measurement and data analysis, and numerical modeling. I have over 5 years expert witness experience with consultations, deposition, and courtroom testimony.