Expert 519060 - AL AK AZ AR BC CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA QC RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

With over 25 years experience as a mechanical engineer, I have a focus in the product design, development, verification, validation, failure analysis and intellectual property of gas turbines/aircraft engines (turbomachinery) and laparoscopic medical devices. I have additional knowledge in marine/ship systems, ultrasonics, fatigue and fracture mechanics, and power generation systems. I have also offered my services for over 10 years as a mechanical engineering expert witness with consultations and deposition.

Expert 319226 - CA(S)

Expertise Description

I have over 20 years experience in Medical Devices with expertise in medical device product development and R&D, manufacturing and operations, quality assurance, regulatory affairs and clinical trial management, and FDA regulation. I have over 10 years expert witness experience with consultations, depositions, and courtroom testimony.

Expert 519839 - AL AK AZ AR BC CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA QC RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I have more than 45 years of commercial, industrial, and university experience in all aspects of plastic and polymer materials, plastic part design, tool design, and plastics processing. I have served as a plastics engineering Expert Witness in more than 25 cases, many of which have required deposition or trial testimony to be given. I am the founder and Principal Researcher of a plastics company, which consists of highly skilled plastic, chemical, and mechanical engineers who have performed consulting and research services to a variety of industries over the last 20 years.

Expert 523144 - AL AK AZ AR BC CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA QC RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I am experienced in the field of roadside safety engineering. While working at a prominent research institute in the field of transportation safety engineering, I assisted in constructing roadside and median safety features for the purpose of conducting standardized crash testing according to NCHRP Report 350 and MASH test protocols. I also documented some of those tests by recording observations, taking measurements of various forms of damage, and compiling technical reports. I also researched ditches, crash cushions, low-volume roads, trees, cable guardrail, W-beam guardrail, concrete median barriers, and temporary concrete barriers. I also investigated the fracture behavior of thin steel under dynamic loading conditions. I am familiar with dynamic and static component testing, computer simulation via LS-Dyna, and full-scale crash testing for Federal approval of highway safety appurtenances. I have also taught classes on elasticity, continuum mechanics, fracture mechanics, and LS-Dyna. I have also conducted a statistical analysis of the in-service performance of guardrail terminals. I have offered my services as a roadside safety engineering expert witness by providing consultations, courtroom testimony, and deposition.

Expert 521262 - IL

Expertise Description

I have over 40 years of experience in technical systems design with a focus in avionics, consumer electronics, semiconductors, medical devices, and wireless industries. I have knowledge in Systems and Requirements, FPGAs, DSP, embedded SW, product validation, customer field trials, manufacturing operations, product compliance, business development, marketing, and applications engineering. I have additional expertise as a commercial and instructor pilot. I have also spent more than 15 years as a technical systems designs expert witness by providing consultations, courtroom testimony, and deposition.

Expert 349285 - MI

Expertise Description

I have more than 30 years experience in intellectual property, product development, and product liability litigation. I have been working as an attorney and professional engineer with an extensive background in electrical engineering. I have represented clients in all intellectual property aspects of electrical, chemical, software, and automotive components. My expertise includes project/design management, electrical system design / architecture, regulatory requirements, and product development. I also have expertise in the analysis of auto vehicles, systems, and components, including airbags, seat belts, and system diagnostics. I have also offered my services for over 15 years as an electrical engineering, medical device design expert witness in Michigan and have provided numerous clients with consultations, deposition, and courtroom testimony.

Expert 519932 - AL AK AZ AR BC CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA QC RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

My career has spanned more than 35 years in the fields of electrical, computer, and optical engineering. I have developed extensive experience in the field of liquid crystal displays (“LCDs”). For example, I was a design and procurement consultant for an avionics company during which time I was involved in redesigning an avionics LCD subsystem to use full color LED light sources instead of short arc lamps. Also during my time as a consultant, I have managed and conducted product evaluations for almost every kind of display product – LCD, CRT, Plasma and LED direct view, and projectors. I was co-founder and vice president of a company that develops and manufactures specialized integrated circuits, including those used for testing LCD drivers and LED drivers. I have tracked liquid crystal displays (“LCDs”) and other display technology worldwide with special emphasis on Japan. In this position, I’ve obtained and evaluated samples of all of the current and future production LCDs. I worked closely with several Japanese companies and laboratories to develop new LCD products and test existing LCD products. My work in this role resulted in my inventing or co-inventing six LCD patents and one projector patent. The LCD patents relate to, among other things, a stacked display panel construction and an LCD with an optical fluid layer. I have also provided my services for numerous clients as an electronics product development and LCD expert witness for over 15 years.

Expert 520963 - CA(S)

Expertise Description

I have been working for over 45 years in the field of Aviation as both a pilot and Airport Security Manager. My expertise is in Airport Security & Operations Management, Aviation Development Planning & Design, and Aviation Security Product Development. I have additional knowledge in wireless security video surveillance & access control systems, directing planning, coordination, & execution of emergency response & recovery operations; acting as primary post-accident/incident liaison to FAA, NTSB and other affected parties; conducting investigation necessary to support risk management efforts; and performing security assessments.

Expert 514225 - FL

Expertise Description

My background in the nutraceutical and pharmaceutical industry has spanned over 30 years. My areas of expertise include formulation development and analytical development. I also have a successful track record of managing people, processes, and projects for the pharmaceutical industry by creating, maintaining, and developing products for specialty products and services. I have also spent more than a decade as a pharmaceuticals expert witness in FL by providing consultations, as well as courtroom testimony and deposition.

Expert 174416 - NC

Expertise Description

With over 35 years of experience as a product development engineer, as well as working with forensic engineering, my expertise has been focused on motor vehicle crash reconstruction and extensive investigation in motor vehicle crash reconstruction of cars, light trucks, commercial heavy trucks, motorcycles, all-terrain vehicles (ATVs) and recreational off-highway vehicles (ROVs). I have additional knowledge, training and experience in analyzing complex vehicle crashes while incorporating state-of-the-art computer video simulation software technology (CAD drawings) to demonstrate and animate how a motor vehicle crash takes place, and imaging and analyzing the crash data reports stored in a vehicle’s event data recorder (EDR) and airbag control module (ACM). I have also spent over a decade providing consultations, deposition, and courtroom testimony as a Motor Vehicle Accident Expert witness in North Carolina.

Expert 403865 - CA(S)

Expertise Description

My career as a Food Scientist has spanned over twenty years. I have experience with new product development, from concept stage through prototype development and commercialization. My areas of expertise include R&D, Technical Service, Product Improvement/Optimization and Nutrition labeling. I also have experience with most foods and nutritional & dietary supplements. I have worked as a food scientist expert witness in Southern California for more than 10 years by providing consultations, as well as deposition and courtroom testimony.

Expert 519007 - IL

Expertise Description

My career in the plastics industry has spanned over 40 years with a focus in engineering, testing and failure analysis of products manufactured from polymeric materials, especially those intended for long-term, load bearing applications. I have additional experience in thermoplastic polymer materials, including plastic piping and geosynthetics, Physical, mechanical and environmental testing of polymeric materials Structure and properties of thermoplastic polymers, polymer alloys and blends Synthesis of thermoplastic polymers and polymer compound formulation Plastics processing methods and Analytical chemistry of organic chemical compounds. For more than 30 years, I have offered my services as a plastics expert witness in Illinois by providing consultations, deposition, and courtroom testimony.

Expert 519017 - CA(S)

Expertise Description

I have expertise in the field of marketing and survey research. As a marketing and consumer survey expert witness, I have more than 20 years experience in designing surveys, managing research projects, providing consulting for clients, and creating rebuttals to surveys for intellectual property litigation and claim substantiation matters I have prior experience working as a marketing consumer survey expert witness.

Expert Information Technology Expert - NY

Expertise Description

I have over 25 years of technology and management experience on building SharePoint development practice in the role of SharePoint, Architect, Technical Lead, Developer, and Project Manager. I have expertise in internet technologies, eCommerce, software, governance, technical design, automated workflow system development, collaboration, portals, e-business, interactive marketing systems, and enterprise project management. I have additional experience in designing and building virtual systems with VMware, Microsoft, or other technologies allowing for the creation, development and testing production systems for clients. These systems are complete environments containing virtual networks, virtual servers and virtual appliances (routers, switches, load balancers, firewalls, and intrusion detectors). The virtual environments allow for design validation and testing of high availability (elimination of single points of failure), automated failover (maintaining user session state and monitoring server state) system performance/capacity planning, information security, business continuity, and disaster recovery (backup/restore of files, server state). I have over 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Flagyl antiprotozoal drug online price

Expert 518566 - MA

Expertise Description

I have more than 40 years of Textile experience with specialization in textile manufacturing processes, including spinning, weaving, knitting, dyeing, printing, and finishing. I also have experience with testing, the analysis for causes of defects, product development, and engineering designs of textile structures. My services are aimed toward determining the cause of problems associated with the appearance and/or performance of textile materials in all forms (i.e. fibers, yarns, fabrics, as well as end items) and in assisting clients develop and/or improve textile products based on the engineered design of textile structures. I have over 40 years of expert witness experience with consultations, deposition, and courtroom testimony.

Expert 518323 - CT

Expertise Description

I have more than 45 years of experience in the field of photography and printing operations. Since 1991, I have been the Principal of a firm focused on strategic business planning, analysis, and related services to companies in the vertical publishing market worldwide. I have a background in Electronic Prepress and many printing technologies, including; Offset, Flexo, and Gravure, and Digital. I offer consulting services to manufacturers on product development and marketing in the field of publishing, with a specific emphasis on data driven design, prepress, print production, and color management. I have over 20 years of expert witness experience with consultation, deposition, and courtroom testimony.

Expert 517954 - OH

Expertise Description

I have more than 35 years of Computer Science experience. My specialties include application programming, systems integration, personal and small business use of technology, bank technology including ATM's and online services, and human factors in technology adoption. I have experience in document imaging and workflow automation. I am familiar with the following technologies: ASP.Net, C#, VB.Net, SQL, LINQ, Visual Studio, and Google Analytics, and MVC. I have previous experience working with banks and handling their product development and design, human interface design, technical and business planning for a new line of business, and I was responsible for team of 3 technical consultants. Previously, as an Adjunct Faculty in Computer Science I taught basic concepts of Computer Science, design, programming, testing and documentation using a variety of instructional techniques. I have over 10 years of expert witness experience with consultation, deposition, and courtroom testimony.

Expert 518054 - UT

Expertise Description

I have more than 10 years of experience in Mechanical Engineering. I also have experience as a Professional Engineer, as well as a design engineering for cargo tanks, and have worked as a forklift operator trainer. I have designed and analyzed numerous products including end dump trailers, side dump trailers, pneumatic trailers, tarping systems, insulated aerial lifts, automated refuse trucks, refuse truck safety systems, material handling equipment, patient moving systems, bike racks and numerous custom testing devices. Some of the testing I have performed includes: cycle testing, strength testing, deflection testing, function testing, and different types of destructive and non-destructive testing to acquire the necessary data. I am familiar with patent prosecution and patent litigation and have written multiple provisional patent applications, and specifications for utility patents. I have also created line drawings for multiple patent applications. I have also been involved in patent litigation and performed multiple invalidity and infringement analyses. I have over 5 years of expert witness experience with consultations and deposition.

Expert 518497 - CA(S)

Expertise Description

I have more than 20 years of experience in the field of Industrial Design with expertise as a Senior Design Director. The teams I lead focus on people’s needs in our time of ubiquitous technology. At a corporate level, I am part of a team which makes decisions on the portfolio of products for the company, about brand, and the products we launch. These products range from soft goods for mobile devices to smart phone and mobile computing accessories, as well as home automation devices.

Expert 515940 - NJ

Expertise Description

I have more than 30 years in the field of Research and Development for Cosmetics with expertise in identifying and developing innovative biologically active raw materials leading to the formulation of successful skin care and topical dermatological over the counter products. My industry experience includes personal care products, chemicals, natural materials, and basic medical sciences. Currently, I provide consulting services to finished goods companies and ingredient suppliers, and I am also Chief Health and Beauty Science Advisor for a company where I do research and development related to designing product profiles and bio-activities profiles, and oversee clinical testing and technical writing. I have over 5 years of expert witness experience with consultation and deposition.

Expert 514964 - WA

Expertise Description

I have more than 35 years of experience in Real Estate. My diverse experience encompasses brokerage, valuation, finance, consulting and advisory services, and litigation support. My expertise is in real estate regulation, data and technology strategies, and standards of professional practice. I consult with clients on regulation, policy and procedures, and mapping workflow. I have over 20 years of expert witness experience with consultations, deposition, and courtroom testimony.

Expert 505785 - AL AK AZ AR CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I have more than 15 years of experience as professional Pharmacist and 6 years as an expert witness in: drug injury causation, pharmacy standards of practice and malpractice, drug-related medical malpractice, medication error event reconstruction, drug product liability, and drug-related civil defense. My expert witness experience includes consultations, deposition, and courtroom testimony.

Expert 508692 - NY

Expertise Description

I have more than 35 years of experience in the fields of Design and Ergonomics with expertise as a Product Designer. I have developed successful products and electronic interfaces in a variety of categories for companies worldwide, ranging from the automotive industry to consumer and medical products. My work in design and ergonomics has led to a number of innovations, not just in the products produced, but also in the methods by which design is approached. I hold more than 50 patents in a variety of product categories. I have over 20 years of expert witness experience.

Expert 505631 - AL AK AZ AR CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I am a mechanical engineer, with over 40 years of experience in the field of internal combustion engines, specializing in diesel and natural gas engines and related technologies. I started my career in 1973 with a company where I gained valuable experience in engine design and development, before moving to the university sector in 1981. I developed research programs in diesel and natural gas engine technologies and taught bachelors’ and master’s courses in diesel engine technology, and advised graduate students at doctoral and masters levels in the field of internal combustion engine technology. In business, I have also managed the development of new technologies and innovation through small teams – processing to the leadership of a large global engineering organization with greater than 2,000 engineers. My leadership role in innovation and technology development, new product development and support has included managing resources and product development in both leading and emerging markets – most notably Brazil, India, and China. I was directly involved with almost every new engine and exhaust emission program from 1993 to 2014. These programs delivered successful engine designs with dramatic reductions of criteria pollutants, oxides of nitrogen (NOx) and particulate matter (PM) of over 98% to near-zero levels. I provided emission regulations promulgated by EPA and California. I have prior expert witness experience with consultation and deposition.

Expert 508428 - IL

Expertise Description

I have more than 45 years experience in Industrial Design specializing in transforming complex design challenges into simple, powerful solutions for the design and development of products. I have experience with mechanical engineering, product design, and the marketing of the designed products. I have over 125 patents most of which are categorized in design. Approximately 36 of my patents are categorized as utility, method, or apparatus patents. I have prior expert witness experience with consultation, deposition, and courtroom testimony.

Expert 508413 - MA

Expertise Description

I have more than 40 years experience in the field of Commercial and Consumer Products. My specialties include business strategy, multi-channel sales and marketing, fast-track product development, team building, business planning and modeling, IP and technology development, and foreign sourcing. I have provided exclusive, long term advisory services that help Boards and CEO's increase the enterprise value of start-up and high growth companies.

Expert 507100 - CA(N)

Expertise Description

I have more than 45 years experience as a product innovator. I have helped companies either design products that do not infringe patents, or design products for which strategic patent positions are possible. I have a dozen or more patents in various fields and have licensed or sold over 250 SKUs over the last 30 years.

Expert 505632 - AL CT

Expertise Description

I have more than 20 years experience in the field of Chemistry with expertise in Plastics. I have experience with innovations and development of new additive and filler products used in plastics such as polyethylene, nylon, polyurethane, PVC, and composites using ISO Project Design. I have handled customer interface with technical, marketing, and management of personnel; as well as patent writing for new products developed.

Expert 503425 - ID

Expertise Description

I have more than 30 years experience in the field of software, firmware, and hardware design, test, and manufacturing. I have expertise in diagnosing and resolving a broad range of engineering problems. I provide training, consulting, and authoring to the embedded systems industry to promote good hardware/firmware/software design practices. I also provide contract engineering services in design and firmware programming. I have additional experience with product liability claims, patent and intellectual property infringement, trade secret misappropriation, and breach of contract. I have prior expert witness experience.

Expert 318043 - CA(N)

Expertise Description

I have over 20 years experience with technology, intellectual property, and business areas. My background and expertise includes: computer systems; computer architecture; semiconductors; CPUs; due diligence (investment); semiconductor design; semiconductor manufacturing; systems-on-a-chip; systems architecture; electronic games and toys; mobile electronics; low power electronics; networking; networking protocols; technical software; embedded software; enterprise software; integrated circuit fabrication; algorithms, M&A, patent due diligence; business plan development; and turn-around management.

Expert 318497 - DC MD PA TN VA

Expertise Description

I have more than 20 years experience in economics. My expertise includes econometrics, public finance, and economic development. I have additional experience with class certification and economic damage in antitrust and RICO cases. I am skilled in providing industry analyses for consumer products, chemicals, and other industries. I have over 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 170265 - CA(N) CA(S) MI NY OH WI

Expertise Description

I have over 40 years experience as a Laboratory Director specializing in Automotive Lighting and LED technologies. I have an in-depth knowledge of all automotive exterior lighting equipment from inception, design, and manufacture, as well as the national and international regulatory requirements. I have an excellent understanding of existing automotive LED patents and have supported depositions and inquiries related to patent infringements and patent litigation. I have over 5 years expert witness experience.

Expert 107492 - NY

Expertise Description

I have over 40 years experience in the computer industry specializing in Software Engineering Methodologies and Project Management. I have experience in Information Technology (IT) project failures. My expertise includes the ability to communicate complex technical concepts clearly and the ability to scan thousands of pages of documents and email records to analyze a complex IT development project. I am also an expert in IP disputes involving computer software, including claims of patent infringement, trade-secret misappropriation, and copyright infringement. I can provide forensic analysis of software source code and productivity analysis. I have more than 15 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 127972 - KY

Expertise Description

I have more than 40 years experience in engineering, manufacturing, and management, specializing in forensic engineering and accident reconstruction. My expertise includes: lifts, hoists, jacks, cranes, industrial machines, hydraulic equipment, tools, material handling, fork lifts, aerial work platforms, loaders, automotive lifts, and scissor lifts. I have additional expertise in product safety, product failures, product liability, testing, compliance with standards (American National Standards Institute (A.N.S.I.) and International Organization for Standardization (I.S.O.)), and compliance with regulations (Occupational Safety and Health Administration (O.S.H.A.), Environmental Protection Agency (E.P.A.), and Department of Transportation (D.O.T.)), and adequacy of warnings, instructions, and labels. My experience includes the development of explanatory exhibits and the preparation of evidence for trial. I have over 20 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 160956 - TX

Expertise Description

I have more than 30 years of experience in design, manufacturing, and equipment engineering, with an emphasis on equipment used in oil and gas field servicing. My expertise includes: triplex / quintiplex pumps and pumping systems; jet, batch, and recirculating mixers; cement / sand bulk handling systems; coil tubing injectors; carbon dioxide / nitrogen equipment; equipment packaging on trucks, trailers, skids, barges, and offshore installations; engine, transmission, and various drive train systems for pumps, vehicles, and auxiliary equipment; hydraulic fracturing; cementing; acidizing; blenders; cooling system design for engine, transmission, pumps, and hydraulics; hydraulic applications; open and closed loop circuits; truck chassis and trailer design; Department of Transportation (D.O.T.), Occupational Safety and Health Administration (O.S.H.A.), and environmental regulations; and wireline trucks. I have additional expertise in design, manufacturing, problem solving, improvement of existing equipment, fleet evaluation, equipment personnel training, and safety training. I have over 5 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 128394 - DC TX

Expertise Description

I have over 50 years experience as a Laboratory Director specializing in mechanical design engineering, with an emphasis in all phases of industrial equipment and machinery design, vibration, including fans, blowers, motors, generators, engines, couplings, gearboxes, dynamometers and rolling mills. My expertise includes: troubleshooting of aircraft gas turbine engines and accessories, auxiliary power units, rotary wing drive gearboxes and gear trains. My expertise also includes: various motors, blowers, and variable frequency drives as well as ship propulsion systems, including diesel and gas turbine engines. I have additional expertise in troubleshooting, machinery malfunctions and failures, and machinery accidents, including accidents leading to extensive property damage, injury, and death. I have extensive experience in the use of vibration as a diagnostic tool, as well as high speed rotor balancing. I have experience with planning and executing heavy machinery lifts, evaluations of reinforced concrete foundations, and evaluations of fabricated machinery support structures, advanced vibration analysis and applications. I have prior expert witness experience.

Expert 128605 - NY

Expertise Description

I have over 50 years experience in Microwave/Microwaves. I have experience with microwave products and applications and developed numerous microwavable products and processes, My expertise includes microwave oven technology, microwave packaging technology, microwave food product development, microwave product testing, designing the microwave product testing laboratory, microwave product hazards, microwave heating fundamentals, industrial microwave, burns, and RF heating technology, applications of microwaves in the food industry, industrial heating applications of microwaves, and industrial drying of solids with microwave and Radio Frequency (RF). I have more than 30 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 128486 - FL WI

Expertise Description

I have more than 30 years of extensive R&D, manufacturing, patent law, and worldwide government chemical compliance and management expertise in the chemical industry. I am nationally known in the UV and EB curable coatings fields. I have hands-on laboratory and R&D management experience in the commercialization of more than 50 new products for a broad range of industrial uses. I developed and implemented multimillion-dollar global patent programs, as well as a corporate worldwide MSDS and government compliance program. I have extensive knowledge of chemical and physical analytical test methods. My legal experience and services include case history review, site inspection, failure analysis, evaluation of opposing expert witness’ findings, developing / recommending / carrying out technical strategies, performing analytical tests to support planned strategy, provide written reports in convincing easy to understand language, attorney depositions, and court testimony. I have over 5 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 107522 - CA(S)

Expertise Description

I have 25 years of experience in the Pharmaceuticals and Medical Device Industry. My experience as a Laboratory Director includes product development, analytical chemistry, organic chemistry, inorganic chemistry, wet chemistry, laboratory testing, environmental sample testing, materials testing, complaint investigations, FDA investigations, quality assurance, manufacturing, facilities system audits, preventative actions, US-FDA / EMEA issues, warning letters, remediation, Therapeutic Goods Administration (TGA) inspection, Millennium Challenge Corporation (MCC) inspection, analytical method development, method validation, internal and external laboratory audits, optimized equipment usage, use of developmental software, consumer products, extensive knowledge in active pharmaceutical ingredient (API) synthesis, active pharmaceutical ingredient (API) and dosage form analysis, stability programs, non-conformance investigations, quality engineering, process optimization, laboratory training, stability study protocols, and pharmaceutical lawsuits. I have prior expert witness experience.

Expert 97167 - LA ME

Expertise Description

I have over 50 years experience as a toxicologist and organic chemist specializing in toxicology and product safety. My expertise includes toxicology includes: Baycol; benzene; causation; creosote; Driving Under the Influence (D.U.I.); Driving While Intoxicated (D.W.I.); drugs / illegal substances; ephedrine; manganese; methadone; PCBs; PPA; welding fumes, vinyl chloride; and Vioxx. My expertise in product safety includes: cosmetics; CRO audits / recommendations; nanotechnology / nanotoxicology; pharmaceuticals; pre-clinical study design / toxicology; product development / hazard assessment / safety assessment; study monitoring; and toxicology protocols. I have more than 25 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 96660 - CA(S)

Expertise Description

Doug Schoon, M.S. (Dana Point, CA)  – I have over 35 years’ experience working in the cosmetic, personal care and beauty industry focused on organic and polymer chemistry, including materials testing and ingredient toxicology.  I specialize in cosmetics, salon products, salon safety, and best practices for the professional beauty industry, as well as retail cosmetic and beauty products. My expertise includes: beauty industry regulations and standards; cleaning, disinfection, sterilization, communicable diseases, infections related to hair, nail, skin, eye lashes; cuts, burns, adverse skin reactions such as irritations or  allergies, standard of care, state board regulations, federal regulations, marketing claims, education and nail and cosmetology schools. 
 
I have expertise in European Union and Canadian cosmetic regulation and standards; as well as, salon chemical safety issues, to include injuries, damage, illness, as well as cosmetic / personal care product development and testing, safe handling, air quality and testing, personal protection equipment, product labeling, product warnings and quality control and/or assurance.  I am an internationally recognized author of books/articles, presenter and educator with a large amount of expertise in both natural and artificial nail products, salon practices and services in cosmetology, hair, lashes, nail anatomy and skin care, manicure and pedicure procedures/practices/standards/equipment.  I have over 25 years expert witness experience with consultations, depositions, and courtroom testimony.

Expert 107351 - CA(N) CA(S) FL NV TX

Expertise Description

I have over 25 years experience in the design, development, and technical analysis of electronics and communications equipment. I have experience in cases involving patent infringement; complex trademark infringement; patent damages & royalty calculations; cell phone cases involving wrongfully accused, E-911 issues, call routing, and cell tower records; telecommunications cases involving failures and failure analysis, the local switch, toll call, and VoIP, IVR, and ATIS call centers; internet service providers; and broadband systems including ISDN, DSL, ADSL, and Ethernet. I have additional experience with all aspects of the telephone network and how it operates, the cable requirements needed to provide adequate internet service, testing cables used for high speed internet including CAT5 and high performance cables, and electrical engineering. My additional areas of expertise include electronics, power supplies, system failure analysis, reliability, safety, fault tolerant design methodology, development concepts and technical analysis of electronics, failure mode analysis, and Underwriters (UL) recognition of products for use in North America. I have 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 56947 - CA(S)

Expertise Description

I have over 25 years in industrial technology, specializing in plastics, silicones, adhesives, abrasives, composites, polymers, tapes, epoxies, and sealants, with experience in the aerospace, aircraft, automobile, marine, medical, and other general industries. My expertise includes: account management; contracts; failure analysis; industrial; vehicle; motorcycle; laboratory testing; inventory and distribution logistics; material qualifications; packaging; process development; patent protection, product development and management; quality assurance; training; and troubleshooting. I have more than 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 55215 - CA(S)

Expertise Description

I have over 15 years experience as healthcare administrator, CEO, and former COO of national healthcare and physician management companies. I have experience with health administration issues, including: project management, staff development, practice analysis, expansion, and operational and financial management. My expertise includes A / R and collections, revenue enhancement, claims processing, acquisitions, mergers, investments, human resources, training, staff development, contracting, marketing, and product line management. I have prior expert witness experience.

Expert 51253 - NY

Expertise Description

I have over 45 years experience in business-related issues, including management; marketing strategy; product development; new product program development and implementation; intellectual property; and sales distribution networks. I also have experience in business-to-business marketing; business statistics; market research; product distribution; franchising; distributor management; distributor and dealer evaluation; new product pricing and entry strategy; existing business revitalization; and independent sales options. My expertise includes economic loss, distribution issues, marketing research, trade secrets, trademarks, patents, and copyrights. I have more than 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 40556 - CA(S)

Expertise Description

I have over 55 years experience in Electrical Engineering. My expertise includes patent disputes, patent infringement, trade secret disputes, aerospace, missile system design, study of aircrafts and spacecrafts, and embedded control system design. I have more than 40 years expert witness experience.

Expert 38922 - CA(S)

Expertise Description

I have over 35 years experience in electrical engineering, specializing in product development and general management in healthcare, commercial, and aerospace industries. My expertise includes medical device product development with Ophthalmology, Electrosurgery, and Respiratory care. I have more than 15 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 29579 - CA(S) NY

Expertise Description

I have over 30 years experience in marketing and new product development for consumer goods issues. My areas of expertise include advertising, promotion, distribution, sales, damages, channels, trade dress, pricing, competition, research, and total marketing mix. I have prior expert witness experience with consultations, deposition, and courtroom testimony.

Expert 29068 - AL CA(N) CA(S) NV UT

Expertise Description

I have more than 30 years experience in mechanical engineering with emphasis on the development and improvement of a wide variety of products, including trucking equipment, refuse equipment, hydraulically operated mobile equipment, specialty axles and suspensions, exercise equipment, radio frequency and magnetically shielded enclosures, rotomolded containers, and a variety of consumer products. My areas of expertise include product design, concept generation, design, stress calculations, finite element analysis, modeling, prototyping, testing, manufacturing and assisting in the patent process. I have over 25 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 21375 - CA(S)

Expertise Description

I have over 20 years experience in management with securities and investment firms. My expertise includes: design, implementation and operation of new business ventures and re-structured entities. My background also includes operations and compliance, especially within a regulatory environment. I also have experience with business development, especially as relating to contract negotiations and writing.

Expert 17747 - CA(S)

Expertise Description

****Expert 17747 is no longer available****
I have over 30 years experience in mechanical engineering in the industrial and manufacturing sector, including over 15 years experience in the design of machinery, manufacturing processes, and product design. My experience includes all levels with industrial equipment from hand tools, to operating large punch presses, to printing presses, and to the design of ultra-precision micro-inch accuracy optical lathes. I have 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 500440 - AL AK AZ AR CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I have more than 20 years of experience in the fields of Entrepreneurship and Marketing with expertise in startup ventures, criminal business enterprises, innovation, technology startups, franchising, business consulting, angel investing, and venture capital. On the marketing side, I have experience in, false advertising, branding, social media, competitive intelligence, forensic marketing, marketing research, statistics, industry analysis, and branding. I have knowledge of startups, bad business ventures, criminal business enterprises, business fraud, business interruptions, false product claims, false advertising, branding, social media crime, bad marketing practices, business-to-business marketing, competitive intelligence, forensic marketing, marketing research, statistics, industry analysis, and branding. I have prior expert witness experience.

Expert 500828 - CA(N) WA

Expertise Description

I have more than 40 years of experience in Audio and Electronic Systems Design, ranging from discrete transistor design to complex ASICs (Application Specific Integrated Circuits). I have designed and developed electronics for music faculty research, and served as architect and digital systems designer for a multichannel datalogger product line. I have developed laser diode drive circuitry for a device which marked “edge code” on motion picture release, and led an engineering team to develop a motion picture soundtrack format, participating in and supervising the design of a 6-channel digital recorder and formatter, film camera, digital audio, printhead adapters, playback sensor unit, and Cinema Adapter systems. I am also skilled in team development, as I grew a core of 3 engineers to a team of 25 engineers and technical experts to support the testing of hardware and software encoders and decoders for the launch of the DVD format, as well as HDTV service. I have prior expert witness experience.

Expert 501349 - RI

Expertise Description

I have more than 25 years experience in the Biomedical field with expertise in new product development. I have experience consulting on specialty medical device operations, research and development associated with IP, product development, and clinical and regulatory issues. I have over 5 years expert witness experience with consultation, deposition, and courtroom testimony.

Expert 371479 - CA(S)

Expertise Description

I have more than 30 years in Marketing. My areas of expertise include Strategic Planning, Marketing Planning, Research, Development, Merchandising, Advertising, Copywriting, Editing, media management, Distribution, Sales, Buzz Marketing, SEO, Lead Generation, Telemarketing, Branding, Positioning, Advertising and Sales, and all the other subcategories of the vital and essential process of meeting needs. I have experience with Development and Public Relations for several hospitals.

Expert 459548 - LA OK TX

Expertise Description

I have more than 40 years experience in the field of Metallurgical Engineering with expertise in academic research and teaching. I have experience with failure analysis or products and parts and finding the root cause of fracture failures due to metallurgical inconsistencies, operational causes, and flaws in manufacturing processes. I have demonstrated knowledge in conducting investigations and scientific analysis of equipment failure in industrial operations, with additional experience in accident investigation and reconstruction, engineering investigations, consumer and industrial product failures, product liability, heavy equipment accidents, tubular products failures, welding failures, and corrosion caused failures. I have over 15 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 426406 - CA(S)

Expertise Description

I have more than 25 years in Legal and Business Affairs. My areas of expertise include trademark, marketing, Intellectual Property law, licensing, production, and content acquisition on a global level. I have additional experience with negotiation and account management, business development, strategic marketing. I have experience with deal-making on behalf of cable, satellite, Internet, hardware, software, mobile/wireless, distribution and production companies.

Expert 426696 - CA(N)

Expertise Description

I have over 25 years experience with Strategic Marketing, Business Development, Management, and Engineering. I have experience with account, channel & product management, business plan creation, development & execution, technical knowledge, new product development and new product introduction, funding expertise with start-ups, Pre-IPO, Post IPO and later stage companies, high impact marketing/sales strategy development and execution, strategic business development and merger & acquisition evaluation, and contract development & negotiations.

Expert 427826 - CA(S)

Expertise Description

I have more than 25 years in the field of Cosmetic Chemistry. My extensive experience includes research and development, product development, business development, operations, sales and marketing for personal care, skin conditions, cosmetic procedures, OTC, Nutraceuticals and pharmaceutical industries.

Expert 462407 - CA(N)

Expertise Description

I have over 45 years experience in the field of Software Development with expertise in testing, evaluation, and management. I have experience with large, global software systems, as well as applications and components for smaller niche markets. I have worked on projects ranging from low-level device drivers to high-level, web-enabled, commercial applications. I have additional experience with litigation involving commercial software systems as intellectual property: patents, copyrights, trade secrets, contracts, and source code analysis. I have more than 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 460317 - CA(N) CA(S)

Expertise Description

I have more than 25 years experience in the fields of Biotechnology and Pharmaceuticals with expertise in life sciences industries and academics. I have experience with patent/intellectual property review, R&D, product development/evaluation, applications development, marketing, business development, manufacturing, national/international sales, customer support, strategic partnership, licensing, OEM, acquisition and joint ventures. I have over 5 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 325109 - CA(N) CA(S) DC NV

Expertise Description

I have more than 30 years experience in the field of Electronic Design with expertise in electronic engineering, the design of electronic controls for the Unmanned Air Vehicle (UAV) market, including inertial measurement, autopilots, electrical power controls, RF systems and video technology. I have experience with power supplies, intellectual property disputes, ITC matters, and patents. I have prior expert witness experience with consultations, deposition, and courtroom testimony.

Expert 460318 - GA

Expertise Description

I have more than 30 years in the Packaging and Beverage Industries with expertise in developing plastic closures for soft drink bottles and managing corporate package testing labs. I have additional experience in quality glass bottles, consumer behavior, primary and secondary packaging, production equipment and breakage, and distribution channels on 6-continents. I have additional experience with support in product liability, extortion, counterfeiting, and regulatory cases. I have prior expert witness experience with consultations and deposition.

Expert 459903 - CA(S)

Expertise Description

I have more than 30 years experience in the field of Retail Solutions with expertise in buying and marketing, retail management, inventory management, pricing strategies, apparel and accessories planning, product management, wholesale management, and e-commerce. I have additional knowledge of vendor negotiations, inventory control, POS systems, storefront, and catalog design. I have over 10 years expert witness experience.

Expert 452009 - CO

Expertise Description

I have 15 years experience in the field of Vehicle Design and Engineering, with specialized knowledge in accident reconstruction and product failure. I have additional knowledge with casting, forging, vehicle design, stamping, machining, vehicle dynamics, performance, time-space relationship, driver/rider reactions, occupant kinematics, human factors, and visibility analysis. I have been an expert witness for over 5 years with experience in consultations, deposition, and courtroom testimony.

Expert 419592 - AL AK AZ AR BC CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA QC RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

I have more than 30 years experience in the field of Brand Identity and Jewelry Design with expertise in all aspects of branding strategy and design analysis for national and global brands. I have knowledge in trademark and trade dress, package and product design, intellectual property, brand communications, brand development, marketing strategy, advertising and sales, licensing, visual brand identity, advertising claims, copyright damages, consumer research, and planning and analysis. I have over 10 years expert witness experience with consultations, depositions, and courtroom testimony.

Expert 11725 - CA(N)

Expertise Description

I have more than 25 years experience of varied R&D, new product development and project management. I have experience with the product development process, from idea evaluation and prototype design to high volume manufacturing. My expertise includes includes vendor sourcing, pricing, personnel training and supervision, budgeting and profit control through manufacturing engineering. 

Expert 433308 - MA

Expertise Description

I have more than 25 years experience in the life science research and biopharmaceutical tools industries. I have experience with biochemistry and technology as a development scientist and technology manager. I am knowledgeable in the products used to analyze and purify proteins and nucleic acids, as well as protein analysis and purification technologies. I have a working knowledge of molecular and cellular biology. My technology development and product management expertise includes strategic planning, technology road-mapping, and product positioning. I have additional experience with intellectual property and freedom to practice assessments.

Expert 432761 - NY

Expertise Description

I have more than 35 years experience in the field of Plastic Engineering, Polymers and Manufacturing. My extensive experience includes polymers, extrusion, manufacturing, processing and packaging, product and process development, market research, and polymer chemistry. I have over 20 years expert witness experience with consultations, deposition and courtroom testimony.

Expert 431707 - CA(N)

Expertise Description

I have more than 10 years experience in the field of Intellectual Property. I have extensive experience with patent analysis, international patent, mobile devices, infringement analysis, wireless devices, IEEE patent, website architecture, internet commerce, software sales, web server architecture, marketing, product development, technology-licensing, communication devices, and mask-programmed video controller. I have over 10 years expert witness experience.

Expert 431656 - WA

Expertise Description

I have over 30 years experience in the Hospitality Industry. I have extensive experience in management, marketing, brands, brand management, product development, training and coaching staff, finance and corporate operations, as well as experience with training programs and quality-control systems. My experience further includes consulting with a broad range of foodservice businesses, including independent restaurants, private clubs, hotels, casinos, and multi-unit chains.

Expert 429450 - AZ

Expertise Description

I have over 20 years experience in the field of Software User Interface. My extensive experience includes product user experience, usability strategy, user research, prototyping, design, usability testing, software interface architecture, product interface design, graphic user interfaces (GUIs), and object-oriented user interfaces (OOUIs). I have prior expert witness experience.

Expert 426130 - CA(S)

Expertise Description

I have over 30 years experience in the field of Electrical Engineering. My extensive experience in research of advanced mixed signal concurrent processing integrated circuits, investigation of path planning and neural network ASICs, design of custom CMOS image sensors for the Active Pixel Sensor (APS) R&D team, and semiconductors. I was one of the three original inventors of the CMOS APS technology.

Expert 425577 - IL

Expertise Description

I have more than 30 years experience in the field of Electrical Engineering with microelectronics research and biomedical engineering. I am highly knowledgeable in medical instrumentation, such as ballisocardiography and wireless diagnostic systems; DNA sensors, fabrication of micro-pump, diamond field emission devices, Micro-electro-mechanical Systems (MEMS) gas sensors; nanotechnology; device fabrication; integrated circuit fabrication; and modeling and simulation concerning transistors for circuits. I have over 5 years expert witness experience.

Expert 425522 - CO

Expertise Description

I have over 25 years experience in the field of Mobility Consulting. My extensive experience includes market research, adaptive industry, mechanical hand control, electron gas/brake and steering system, brake design, wheelchair lift, OSHA regulations, vehicle fire, unoccupied wheelchair lift, transfer seatbase, hydraulic backup steering system, and wheelchair restraint. I have over 10 years expert witness experience.

Expert 425497 - PA

Expertise Description

I have over 20 years experience in the field of Forensic Biomechanics. My extensive experience includes analyzing human movements, personal injuries, product design, product development, medical devices, and mechanical engineering. I specialize in injuries caused by externally applied forces resulting in bone fractures or dislocations, soft-tissue tears, avulsions and ruptures. I am experienced in technical consultation, investigations, research, analysis, report and testimony regarding disputes resulting from injuries such as slip / trip / falls, vehicle crashes, product failure, athletic and recreational participation, construction accidents, manufacturing accidents, playground accidents, medical device failures, and vehicle collisions. I have 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 425526 - CA(N)

Expertise Description

I have over 35 years experience in the field of Seating Specialist. My extensive experience includes wheelchair seating, support services, adaptive technology products, testing criteria, cushion testing, product design and development, pressure mapping, mattress testing, and safety consulting. I have prior expert witness experience.

Expert 404251 - TX

Expertise Description

I have over 30 years experience in the Tortilla and Snack Industry. My extensive experience includes all areas of tortilla chip industry, including administrative, operational, research and development (R&D), sales, technical skills, lean manufacturing, 5-S, continuous improvement, leadership training, staffing needs, tracking shrink, productivity, cost reduction, production downtime, strength, weakness, opportunities and potential threats (SWOT) analysis, formulations for new product lines and improving existing formulas, basic art and science of baking, audits, food allergies, distribution, and sales. I have prior expert witness experience.

Expert 399327 - CA(N)

Expertise Description

I have over 15 years experience in the field of Photonics. I have extensive research, development, and management experience, including the generation of intellectual property, new product introduction, and problem diagnosis. My experience includes photonics / fiber optic / telecommunication technology, integrated photonics, energy-efficient building design and technology, polymers, adhesives, fabrication of prototypes, laser chemical vapor deposition, and light-emitting diode (LED) and light-emitting diodes (LEDs) technology.

Expert 149592 - CA(S)

Expertise Description

I have more than 40 years experience in Engineering and Medical Devices. My areas of expertise consists of hydroculators, moist heat pads, thermal cooling pads and cooling apparatus; laser and thermal hair removal devices, dermabrasion equipment; luggage and costume jewelry; patient beds, transport gurneys; failure of Pilates exercise devices; surgical staples; surgical fluid warmers; pedicle screw failure; absorbable shoulder tacs; suture failure; chiropractic devices; dental burr and drill failures; defibrillator mechanical design issues; surgical laser power cord design reliability, and much more. My additional experience includes engineering and management focused on research and development, design, and manufacturing in the medical device, packaging, toy, consumer product, and aerospace industries. My responsibilities have ranged from original product conception through high volume manufacturing, including plastic extrusion, injection molding, assembly, decorating, labeling, and packaging. I have experience with FDA requirements and Good Manufacturing Procedures (GMP’s); producing prototype models; performing computer aided plastic part design (SolidWorks) and failure; and hazard analysis including Failure Mode Effects Analysis (FMEA). I have over 10 years expert witness experience.

Expert 385935 - MA

Expertise Description

I have more than 45 years experience in the field of Physical Chemistry and Chemical Engineering. I have broad and extensive knowledge in the chemical, thermal, mechanical, physical, and environmental sciences. My experience includes arson, failure analysis of materials; reverse engineering and quality control of products; environmental testing; and chemical analysis. I have prior expert witness experience.

Expert 380938 - AK

Expertise Description

I have more than 25 years experience in the field of Spatial Information and Digital Modeling. My experience involves research assistance, teaching courses in LiDAR for Geospatial Applications, Remote Sensing, Digital Elevation Modeling, Digital Cartography, and Geovisualization, as well as researching innovative satellite data products and providing strategic planning, geo-technical consulting, and software architecture to geo-spatial businesses and governments. My additional experience includes development of GIS / photogrammetry applications, including spatial adjustments and interpolation of raster data, GIS software design, data modeling / analysis, product development, project management, marketing, and sales. I have prior expert witness experience.

Expert 392519 - IN

Expertise Description

I have more than 25 years experience in the field of Clinical Pedorthics. My experience involves podiatric / orthopaedic orthotic work and inserts; podiatric manufacturing techniques and medicine; product development and biomechanics of footwear / footcare products; and diabetic shoes, dispensement, and fitting.

Expert 392518 - IN

Expertise Description

I have more than 35 years experience in the field of Clinical Pedorthics. My experience includes dual-axis and triaxial intrinsic posting technique; adolescent and team rehabilitation; functional foot orthoses; foot and ankle issues; product development and biomechanics of footwear products; heel grip / slippage of shoes; and musculoskeletal injuries. My clinical experience involves palliative care in orthopedics; sports / geriatric / pediatric feet orthoses; biofoam impression orthoses; retail shoe-fitting, diabetic foot ulcer, inserts, and custom foot and ankle orthoses; and applied biomechanics to the lower extremity.

Expert 323761 - CA(S)

Expertise Description

I have more than 35 years experience in the Plastics Industry. My expertise includes overall plastics manufacturing operations management, plastic testing and failure analysis, materials selection, new product design, design analysis, manufacturing assistance and tooling to testing, and patent infringement. I have additional knowledge with artificial turf, and artificial sports fields. I have over 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 320313 - AL CA(N)

Expertise Description

I have more than 35 years experience in the computer industry, with special expertise in computer architecture (hardware and software), microprocessors (x86, RISC, Itanium, VLIW, SIMD/SSE, DSP & Embedded), semiconductor design and development, RTL & VHDL, computer graphics and multi-media, digital photography, digital video, software imaging and desktop publishing, and merger of video & graphics. I also have additional experience with storage hierarchies, computer telephony: Computer telephony database, personal call management, capabilities based security, networking, and knowledge based systems. I have prior expert witness experience with consultations, deposition, and courtroom testimony.

Expert 350592 - NY

Expertise Description

I have over 20 years experience of marketing, strategy, operations management, product development, and executive leadership in financial services with concentration in electronic payments. My consultant experience includes focusing on transition from paper checks to electronic payments. My projects have included bank training on Electronic Funds Transfer (EFT) / check processing, product strategy, telemarketing fraud, risk management for corporate account takeover, wire remittance delivery, and Automated Clearing House (ACH) management.

Expert 366045 - CA(N)

Expertise Description

I have more than 30 years experience in the areas of semiconductor processing, semiconductor wafer probe, wafer fabrication, product development and testing, and silicon device physics. My expertise includes low power and high performance integrated circuits (ICs) for military and aerospace applications, integrated circuit fabrication, electronic design automation (EDA) tools, intellectual property (IP), front-end fabrication and capital equipment, back-end test and assembly and IC end-markets, and reverse engineering analysis. I have prior expert witness experience with consultations, deposition, and courtroom testimony.

Expert 369495 - BC

Expertise Description

I have more than 30 years experience in the field of Video Streaming Systems. I am highly experienced in the development of core technology and product development, internet protocol (IP), database management, including next-generation distributed computer operating system, featuring a Distributed TCP / IP State Machine and Parallel HTTP Server; operating system that powers the SX7000, optimized for extremely high-bit-rate video streaming; and a high performance video storage & database system that stores, manages, and indexes terabytes of video data.

Expert 370607 - CA(S)

Expertise Description

I have more than 10 years experience in the field of audiology with a specialization in cochlear implants for pediatric and adult patients. My consultations include implant training, implant services, and research in otolaryngology. I have additional experience conducting research in the field of cochlear implants. I have prior expert witness experience.

Expert 365046 - CA(N)

Expertise Description

I have over 30 years of experience in the Garment industry. My expertise includes fashion design, factory production, domestic and offshore, operations, international production, textiles technology, importing, costing, product development, retail / sales, visual merchandising, and production strategy. My consultations consisted of sourcing and manufacturing logistics. I also have experience in apparel production and quality assessment. I have prior expert witness experience.

Expert 321751 - CA(N) CA(S) CO CT DE FL MI NJ NY PA TX WV

Expertise Description

I have more than 35 years experience in Healthcare Management Consulting, Litigation Support, & Hospital Operations. I have extensive experience with complex healthcare-related litigation pertaining to third party billing disputes, identification of breach of standards of care in the operation of hospitals, nursing homes and ambulatory care environments, physician credentialing in both hospital and managed care organizations, hospital and medical staff bylaws, interpretation of JCAHO standards, JCAHO credentialing, negligent hiring, managed care contracting, administrative and billing compliance, economic analysis related to enterprise value, and fair market value compensation. My regional and national consultations include market planning, product line initiatives, operations improvement, business valuations, medical staff development, hospital-physical joint ventures, healthcare system reorganization, group practice formation, third party contract review and negotiation, and physician and hospital business office issues. I have over 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 12257 - CA(S)

Expertise Description

I have 40 years experience as a Biochemical Engineer. My expertise includes nutrition and food science; food product development; food engineering; food chemistry; aseptic systems; and chemical engineering. I have prior expert witness experience.

Expert 343607 - GA

Expertise Description

I have more than 35 years experience in the Pharmaceutical and Pharmaceutical Packaging industries. I have extensive experience in the areas of Laboratory Management and Food and Drug Administration Regulations. My experience also includes various technical management positions in Quality Control, Technical Service, Labeling, and as a Director of Research and Development in Pharmaceutical Packaging. I have over 10 years expert witness experience.

Expert 325204 - CA(N)

Expertise Description

I have over 30 years experience in Semiconductor Systems with broad operating experience in senior technical roles, including three startup companies spanning the semiconductor, printing, and defense industries. I have expertise with designing multiple custom integrated circuits, hybrid assemblies, and manufacturing processes. I have experience developing advanced technology for integrating semiconductors into systems, including a new flip chip connector, a novel cooling method, a new test methodology, and a solder-free assembly method. I also have experience developing new technology for HDI interconnection substrates supporting a pad pitch as small as 40 um. I have experience with effective rework strategies for locating and replacing defective components in systems. I also have expertise with wafer and panel level processing, including automation for low cost production. I have prior expert witness experience.