Corrosion Engineering Experts
Search Related Disciplines:
Engineering Geology, Building Engineering, Aerospace Engineer, Sanitary Engineering, Acoustical Engineer, Safety Engineer, Structural Engineering, Plant Engineering, Utility Engineer, Fiber Engineering, Fire Protection Engineering, Value Engineer, Traffic Engineering, Structural Engineer, Value Engineering
Select Expert Click checkbox to include in your expert selection.
Expertise Description: Ph.D., P.E. – Consulting expert in Civil Engineering. Expertise includes: geotechnical engineering, structural engineering, retaining walls, foundations, remedial repair engineering, forensic geotechnical or structural engineering, masonry evaluation including steel lintels, wall anchors and corrosion, evaluation of anchored earth retention, slope failure evaluation, foundation or structural failure, personal injury structural failure evaluation, code compliance evaluation, piering and piling evaluation, drainage evaluation, safe house evaluation and design, infrastructure, and bridge evaluation. Ph.D... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: Ph.D., P.E. – Consulting expert in Mechanical Engineering with more than 20 years experience in the field. Expert in force reconstruction of low-damage impacts, time-distance studies, analysis of photographic evidence, and three-dimensional reconstruction using photogrammetry or videogrammetry. General expertise in all types of applied mechanics or engineering mechanics problems. Capable of non-ballistic trajectory analysis and failure analysis of ladders and other similar structures. Current university faculty member in Mechanical Engineering... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: Ph.D. - Industry Expertise & Experience in: Ceramics & ceramic composites, Wear and corrosion, Aerospace (turbine engine & hypersonics), Fractography of ceramics and glass, Chemical processing, Metal casting & ceramic cores, Thermal management, Armor, Refractories, Cement, Automotive (catalytic supports), Heat treating (vacuum). Materials: Ceramics and ceramic matrix composites, Glass, Preceramic polymer & PIP (Polymer Infiltration & Pyrolysis) processing, Traditional (sintered) & melt infiltrated ceramics, Metals casting (ferrous and non-ferrous), ceramic... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: M.S., P.E. - Mechanical and materials engineer, specializing in failure analysis. Expertise includes: accident investigation / reconstruction; construction defects (plumbing / H.V.A.C.); failure analysis (building materials, communications equipment, consumer products, machinery, medical devices; pressure vehicles, vehicles); fatigue / fracture / corrosion of metals / plastics / fiber composites; materials engineering; mechanical engineering; modal analysis; vibration testing; stress analysis; strain gage testing; finite element analysis; fires and explosions; thermal analysis and... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: B.S. - Consulting ceramics engineer with hands-on knowledge of processes related to ceramics, glass, and fiberglass production, management, and marketing, including: natural gas / oxygen combustion systems for furnaces; burner hardware; forming processes; waste management strategies; nuclear waste vitrification; environmental abatement; corrosion testing; industrial gas production; and combustion technology. Experienced in the automotive, bio-medical, defense, electronics, and nuclear fields. Previous expert witness analysis, investigations, affidavits, and testimony on combustion equipment... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: M.S., P.E. - Practicing civil engineer, specializing in oil and gas pipelines. Expertise includes pipeline: accident investigations; coatings; codes and compliance (federal, state, industry); corrosion; depth of cover; design, construction, operation, and maintenance regulations for all gas transmission, gas distribution, and petroleum pipelines; excavation damage; hydraulics; hydrostatic testing; leakage; liquid natural gas (L.N.G.); oil fields; pneumatics; propane; ROW easements; safety audits; safety inspections; storm drainage; and threaded pipe. Additional management... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: P.E. - Consulting expert with more than 40 years experience in the field. Metallurgical engineer and expert witness with knowledge of fracture mechanics, thermal fatigue, fittings, crevice stress, corrosion cause and prevention, resonant frequency failures, ductile and stress failure, forensic engineering failure analysis problem solving / trouble shooting, fracture studies, and corrosion causes and prevention. Over 30 years expert witness experience. Consultations, depositions, and courtroom testimony... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: Over 20 years experience as a materials and corrosion specialist. NACE certified Cathodic Protection Specialist. Areas of expertise include failure analysis, premature deterioration of metals, alloys, concretes, and coatings. Expert has investigated pipelines, post-tensioned bridges, parking garages, high-rise buildings, housing developments, tanks, tunnels, water and wastewater structures, and speed patrol boats... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: Mechanical and electrical engineer experienced in: design and testing; friction, corrosion and stress analysis; accident investigation and reconstruction; material and component failure analysis; materials characterization and testing; electrical fires cause and origin investigations; product liability, reliability, and patent review; as well as, slip and fall, lightning, and electrocution... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: P.E. - Experienced Naval Architect and Marine Engineer with almost thirty years of experience in the industry. Expertise includes: small crafts, fishing vessels, recreational boats, yachts, ferries, shipyard productivity and claims, and offshore oil exploration. Additional areas of expertise include: recreational boat accidents including outboard motor steering failures, PWC accidents, outboard motor support failures, off-throttle steering, boat collisions and allisions, falls aboard and overboard, high speed craft, primary and secondary... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: P.E. - Experienced in engineering including failure analysis of metal, alloys and non-metals, coatings and paints, materials consulting, corrosion, and laboratory testing... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: Ph.D. - Experienced in accident reconstruction, product liability, failure analysis, and fracture mechanics. Expertise includes: glass failures and glass testing (bottles, windows, windshields, dishes, cook wear, etc.); metallurgical failures (welds, gears, ladders, straps, cables, etc.); ceramic failures; corrosion failures; plastic, polymer, composite material, and wood failures; and user safety and equipment design. Additional experience in contract disputes and patent disputes. Ph.D in Materials Science and Engineering. Over 30 years expert witness... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: Ph.D., P.E. - Licensed Professional Engineer experienced in metallurgy with over 17 years in the industry. Areas of expertise include failure analysis of metals and materials, corrosion, metallography and microstructural evaluation, materials processing, and metallurgy... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: Experienced in accident investigation and reconstruction; wreckage analysis; structural reconstruction; design defect analysis; power plant and vehicle maintenance reviews; systems analysis and redundant system integration and analysis; failure analysis of materials and structures; stress analysis of structures and mechanical components of systems; stress corrosion cracking including the analysis of the interrelationship of stress and corrosive environments to component failure; slip and fall involving architectural issues and slippery surfaces, stairway design... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: Experienced in naval architecture including surface propulsion applications, sea trials & analysis of high speed amphibious vehicles, tank testing of propulsion systems, and vessel motion analysis. Has provided expert consultation in the areas of collision reconstruction, stern drive failures, yacht sinking, fishing vessel capsizing, and injury resulting from vessel motions, propeller contact, and other causes... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: P.E. - Corrosion engineer and corrosion specialist highly experienced in the areas of marine corrosion, cathodic protection, corrosion / metallurgical failure analysis, designing for corrosion control and facilities/utilities corrosion control. Past experience includes facilitating the application of metallurgical and corrosion technology to the Naval Shore Establishment through the development of criteria for the application of technology for design, construction, operation and maintenance of facilities and equipment, as well as, through... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: P.E. - Degree in environmental engineering. Experienced in corrosion engineering, water treatment, water quality analysis, water and wastewater treatment issues. Areas include analytical and process chemistry, water and wastewater analyses, hazardous waste management, corrosion processes and prevention, project and operations management, swimming pool sanitation equipment, water quality and treatment, wastewater treatment and disposal, food and drug chemistry, environmental sciences and engineering, laboratory management, and swimming pool water chemistry... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: Ph.D., P.E. - Consulting metallurgical and materials engineer offering in-house analytical services related to characterization of advanced metallic, nonmetallic, ceramic, and composite materials including metals, rubber, fiberglass, ceramics, and plastics. Experienced in product liability, personal injury, and patent infringement cases, as well as, failure analysis involving: general corrosion, wear, and mechanical issues; surface characteristics; product development and design; automotive failures (axles, springs, tires, engine components), welds, plumbing / piping, medical... » Read Complete Profile
Select Expert Click checkbox to include in your expert selection.
Expertise Description: P.E. - Over 27 years experience in civil engineering. Areas of expertise include concrete and concrete materials, analysis of its deterioration, strength and condition, corrosion of reinforced metal, repairs to structures with regards to preplaced aggregate concrete, as well as, epoxy injection, and cementitious grouts for structural purposes... » Read Complete Profile
