Expert 523264 - GA

Expertise Description

I have over 45 years' experience in lumber, with expertise in: grading, grade supervisory services for grade stamped and non-grade stamped lumber, grade and yield surveys and informational inspections, reinspections, structure inspections, consultation regarding export lumber, alternate grades of lumber, and renewable softwood species. I have provided deposition, consultations, and courtroom testimony for more than 40 years as a lumber grading expert witness.

Expert 46548 - CA(S)

Expertise Description

With over 40 years experience in geotechnical engineering, my expertise is in soil engineering, geology, foundation engineering, structural engineering, materials engineering, and hydrology. I also have knowledge in hillside residential developments, urban redevelopment, oil storage and water tanks, pipelines, bridges, multi-plate arch structures, waterfront structures, storm drains, reservoir embankments, and sewage disposal systems. I have spent more than 40 years as a geotechnical engineering expert witness with consultations, courtroom testimony, and deposition.

Expert 522034 - PA

Expertise Description

I have over 20 years experience as a Residential Building Inspector with expertise in matters concerning residential construction, inspection and code compliance. I have additional focus in defect recognition and reporting on structural, roofing, exterior, electrical, heating, cooling, insulation, ventilation, plumbing and interior systems and components. I have spent more than 5 years as a residential building inspector expert witness by providing courtroom testimony and consultations.

Expert 522008 - MI

Expertise Description

As a structural engineer with more than 35 years of experience, I have a focus in property casualty damage issues including: structural failures and defects, water intrusions, roof distresses, origin and cause of fires, mechanical failures, electrical failures, and trip and fall conditions. I have also spent over 10 years as a structural engineer expert witness.

Expert 521880 - OR

Expertise Description

As a construction defect analysis expert witness, I have over 35 years experience in Construction with analysis due to code violations or natural defects, tactile and physical testing for structural, stairway, walkway, roadway, illumination, drainage, leakage, and catastrophic damage to structures due to fire, soil, drainage, water, and sewer leaks. I have additional knowledge in trip and falls and missteps, handrail/baluster/balustrade size and strength, parking lot and roadway illumination levels. I have continuing education in computer aided design, land development, dam safety and land planning, stormwater master planning, and septic system design. I have spent over 30 years as a construction defect analysis expert witness and have provided numerous clients with deposition, consultations, and courtroom testimony.

Expert 520743 - FL

Expertise Description

I have more than 15 years of multidisciplinary research experience in the aerospace, biomedical and defense industries. My expertise includes bone-prosthesis and retinal stent finite element analysis, damping modeling in structural dynamics, design of smart-material actuators for active control of turbomachinery blades and adaptive airfoils , sensor design and calibration, and instrumentation design. I have additional interest in experimental modal analysis and turbomachinery. I have prior experience providing my services as an aerospace expert witness.

Expert 520330 - VA

Expertise Description

I have over 25 years experience as a Mechanical and Structural Engineer. My areas of expertise include mechanical design, structural analysis, Finite Element Analysis (FEA), intellectual property analysis, perimeter security, transportation safety, materials testing and evaluation including failure analysis of components in vehicular, pipelines, fuel tanks, pressure vessels, accident reconstruction, accident causation, vehicle dynamics, biomechanics, safety analyses, seat belts, airbags, occupant protection systems, guardrails, crashworthiness, crash data retrieval, accident scene/roadway assessments, total station surveys of accident sites & vehicles, vehicle damage & crush analyses, delta-v, time-position-speed histories, computer simulations & animations, and technical reports. I have spent more than a decade offering consultations, courtroom testimony, and deposition as a mechanical and structural engineering expert witness.

Expert 522757 - SC

Expertise Description

With over 45 years experience in the civil and structural fields, I have an expertise in building design, building components, and storm water runoff and drainage systems. I have provided consultations, deposition, and courtroom testimony for more than 5 years as a structural engineering expert witness.

Expert 523325 - CO

Expertise Description

I have over 35 years experience in the Lumber Industry. My expertise is in inspection, production, grading, management, training and quality control with over 22 North American softwood species and several European, Australian and South American species. I have spent more than a decade providing consultations and deposition for numerous clients as a lumber industry expert witness.

Expert 524214 - TN

Expertise Description

I have over 15 years experience as a Structural Engineer with expertise in the forensic analysis of damaged and deficient structures, Pre-Engineered Metal Building Design and Consulting, Steel Design, Cold-formed steel design, Masonry Design, Concrete Retaining Structures, Concrete, Wood Design, Aluminum, Building Code Interpretation, Forensic Evaluations, Structural Inspections for the Insurance Industry, Industrial Design, Foundation design for Forge Presses, Metal Buildings, and other Foundation specific design work, Structural Analysis and Rehabilitation of Existing Buildings including Multi-wythe brick structures. I have over 10 years expert witness experience with consultations, depositions, and courtroom testimony.

Diflucan online Without Prescription

Expert 521191 - WI

Expertise Description

With over 45 years of experience in the agricultural and construction equipment industries, my expertise is in product safety & intellectual property, product safety evaluations, product manual safety review and development, structural design review and design for manufacturability. I also have knowledge in the food processing industry. I have spent over a decade as an agricultural equipment expert witness in Wisconsin by providing numerous clients with deposition, consultations, and courtroom testimony.

Expert 519844 - AL AK AZ AR BC CA(N) CA(S) CO CT DE DC FL GA HI IA ID IL IN KS KY LA ME MD MA MI MN MS MO MT NE NV NH NJ NM NY NC ND OH OK OR PA QC RI SC SD TN TX UT VT VA WA WV WY WI

Expertise Description

My career has spanned more than 30 years of experience in the fields of structural and civil engineering. I have provided extensive services for defendants and plaintiff attorneys on construction litigation matters in single and Class-Action both on State and Federal lawsuits. My understanding of core legal concepts has enabled me to assist my clients in the most efficient manner. I bring diversified experience in the field of Structural, Civil and Forensic engineering in design, investigation, evaluation, research, building code and standards development and construction supervision of US, Canada, and International projects. I have provided failure analysis, expert consultation, structural forensic investigation, and damage assessment services for many litigation and insurance related matters. I have been the principal structural engineer on projects for clients such as NASA and several other high profile agencies. I have Provided many technical lectures, presentations, and webinars for structural engineering, Architectural and Building Official communities. I have also worked for more than 15 years as a structural engineering expert witness in the greater Los Angeles area by providing numerous clients with deposition, consultations, and courtroom testimony.

Expert 520523 - OH

Expertise Description

I have been in the field of Structural Engineering for over two decades with research focusing on computational simulation and experimental testing of structures under extreme loads including earthquakes. I have been investigating collapse performance of reinforced concrete and steel buildings through field experiments and numerical simulations.  I have additional experience in the Design, modeling and analysis of structures and their components, Dynamic and progressive collapse of buildings, Earthquake engineering and structural dynamics, Evaluation and rehabilitation of buildings and bridges, Nonlinear structural analysis, and Sustainable structural design. I have also been offering my services for more than 15 years as a structural engineering expert witness in Ohio.

Expert 520596 - OH PA

Expertise Description

I have been working in the field of Civil Engineering, geotechnical engineering, and soil mechanics for more than 40 years with a particular focus in analyzing, understanding, and interpreting underground conditions for contracting projects. I have also spent over 40 years as a civil engineering and Geotechnical Engineer Expert in Ohio and Pennsylvania by offering such services as consultations, deposition, and courtroom testimony.

Expert 519072 - IL

Expertise Description

With over 30 years experience in the civil/structural engineering field, my expertise has been focused on design and construction failures, restoration and renovation of older structures, foundation issues, design deficiencies, basement wall and slab cracking, wall cladding attachment failure (including glazing), beam and slab failure or adverse deflection, and mechanical equipment and piping investigations. I have additional expertise with the design and failure of equipment, including industrial lifting devises, tractor removal, bridge cranes, booms and telescopic cranes. I have also offered my services as a structural engineering expert witness for more than 15 years by providing consultations, as well as deposition and courtroom testimony.

Expert 446602 - CA(N)

Expertise Description

I have more than 35 years experience in the field of Mechanical Engineering with expertise in high-technology applications. I have experience with medical device/biotech product development & concept design, patent and intellectual property research and due diligence, biomaterials applications, portable devices, keypads, robust design, reliability and durability, and manufacturing technology. I have additional experience with reliability and failure analysis services, composite materials, and wind and alternative energy applications. I have over 25 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 517541 - IL

Expertise Description

I have more than 35 years of experience working in the construction industry with a primary focus in home inspection. I worked as a carpenter apprentice and journeyman carpenter before moving on to work as a home inspector for numerous insurance companies. I was also the founder and president of my own construction and home inspection company for 10 years. I have strong experience inspecting moisture intrusion and other types of water damage, indoor air quality, HVAC (heating, ventilation, and air conditioning) systems, and electrical defects. I have also worked as a firefighter and Supervising Fire Marshal. I have more than 20 years of expert witness experience with consultations, deposition, and courtroom testimony.

Expert 513348 - ID

Expertise Description

I have more than 20 years of experience in the Aviation industry, and I am owner and Principal Engineer for a company that provides structural engineering and certification services to numerous companies within the industry. I have developed certification plans, loads reports, structural analysis reports, test plans, and test reports. I have delegated structural tests, coordinated conformity inspections, and reviewed design data for compliance. I am experienced in stress analysis using classical hand analysis methods.

Expert 511297 - CA(N)

Expertise Description

I have more than 40 years of experience primarily in the field of failure analysis and predicting degradation and environmental compatibility of power plant materials under a variety of operating conditions. My experience includes corrosion and environmentally assisted cracking in BWR, PWR, and various raw water environments, and embrittlement of pressure vessel steels and high performance alloys. I am a recognized authority on microbiologically influenced corrosion and have authored reference documents on that topic. I typically perform a dozen or more metallurgical and corrosion assessments per year in addition to roughly half that many hand-on failure analyses. I have performed failure analyses and field investigations on a wide variety of power plant and other industrial components including piping and heat exchangers, pumps and valves, steam and combustion turbines, large electrical transmission towers, chemical processing vessels, steel cables and high performance fiber lifting slings, and industrial washing machines. I have over 20 years of expert witness experience with consultation, deposition, and courtroom testimony.

Expert 452514 - NY

Expertise Description

I have more than 20 years experience in the field of Construction Management Engineering with expertise in structural failures and related damages. I have experience providing technical investigations, analysis, reports and testimony to areas of construction related claims, failures, and injuries.

Expert 107641 - CA(N) CA(S) CT FL ME MA NH NY NC RI VT

Expertise Description

I have over 30 years experience in Bio Medical / Engineering. My expertise includes finite element stress analysis, fracture mechanics, fatigue, failure analysis, fire and explosion analysis, explosion cause and origin, biomechanics, materials science, stress and vibration, and structural design and analysis. I have more than 25 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 165406 - CA(S) NV

Expertise Description

I have over 25 years experience in design engineering for wide range of residential, commercial, industrial and institutional projects including wood frame, steel, masonry and concrete structures varying in size from one to six stories. My other projects include: shoring and underpinning of existing structures, retaining walls, and earthquake evaluation and rehabilitation and fire damage repair projects. I also have over 15 years of experience as a Structural Engineering Forensic Consultant with extensive knowledge of current and past CBC, UBC, local building codes and ordinances. I have prior expert witness experience with consultations, deposition, and courtroom testimony.

Expert 127972 - KY

Expertise Description

I have more than 40 years experience in engineering, manufacturing, and management, specializing in forensic engineering and accident reconstruction. My expertise includes: lifts, hoists, jacks, cranes, industrial machines, hydraulic equipment, tools, material handling, fork lifts, aerial work platforms, loaders, automotive lifts, and scissor lifts. I have additional expertise in product safety, product failures, product liability, testing, compliance with standards (American National Standards Institute (A.N.S.I.) and International Organization for Standardization (I.S.O.)), and compliance with regulations (Occupational Safety and Health Administration (O.S.H.A.), Environmental Protection Agency (E.P.A.), and Department of Transportation (D.O.T.)), and adequacy of warnings, instructions, and labels. My experience includes the development of explanatory exhibits and the preparation of evidence for trial. I have over 20 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 160956 - TX

Expertise Description

I have more than 30 years of experience in design, manufacturing, and equipment engineering, with an emphasis on equipment used in oil and gas field servicing. My expertise includes: triplex / quintiplex pumps and pumping systems; jet, batch, and recirculating mixers; cement / sand bulk handling systems; coil tubing injectors; carbon dioxide / nitrogen equipment; equipment packaging on trucks, trailers, skids, barges, and offshore installations; engine, transmission, and various drive train systems for pumps, vehicles, and auxiliary equipment; hydraulic fracturing; cementing; acidizing; blenders; cooling system design for engine, transmission, pumps, and hydraulics; hydraulic applications; open and closed loop circuits; truck chassis and trailer design; Department of Transportation (D.O.T.), Occupational Safety and Health Administration (O.S.H.A.), and environmental regulations; and wireline trucks. I have additional expertise in design, manufacturing, problem solving, improvement of existing equipment, fleet evaluation, equipment personnel training, and safety training. I have over 5 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 107331 - FL MO OK PA

Expertise Description

I have over 30 years experience as a civil engineer, specializing in structural engineering. My expertise includes: advanced composites; blast testing; bridge inspection; bridge rehabilitation; civil infrastructure renewal / sustainability; composites; concrete; concrete inspections; concrete repair / rehabilitation; construction defects; construction materials; failure analysis; ferrocement; fiber reinforced concrete; FPR; laboratory testing; masonry standards; materials engineering; non-destructive testing; reinforced concrete; research and development; steel reinforced polymers; strength evaluations; structural analysis; and structural fiber reinforced plastics. I have more than 20 years expert witness experience.

Expert 96523 - CA(N)

Expertise Description

I have 20 years experience with civil engineering specializing in urban transportation solutions, including: capital maintenance projects, complex interchange design, and corridor planning studies. My expertise includes: bridge design; construction management; environmental compliance; field inspections; forensic, geotechnical, structural, and transportation engineering; hydraulics; hydrology / drainage; highway design; land development; large cut and cover tunnels; public works; quality assurance / quality control; retaining / tieback walls; seismic retrofits; sound walls; specifications; surveying; toll road design; transportation, and value engineering. I have prior expert witness experience with consultations, deposition, and courtroom testimony.

Expert 51241 - CA(S)

Expertise Description

I have 30 years experience in the construction industry with general contracting and consulting as a civil engineer, general contractor, and realtor. My background includes public works, libraries, commercial facilities, retail buildings, restaurants, residential projects, high rise residential buildings, and educational complexes, including surveying, structural design, structural performance, subdivision design, grading, street improvements, sewers, storm drains, and storm drain channel systems, as well as project management, time impact analysis, contract administration, scheduling, staff training, and O.S.H.A. My consulting / claims experience includes: mediation; claim preparation; litigation support; document research and analysis; contractual disputes; and claims avoidance advising. I have more than 10 years expert witness experience.

Expert 52044 - FL NY

Expertise Description

I have over 35 years experience in the field of Civil Engineering. My expertise includes construction, engineering assessments, civil engineering, forensic engineering, and value engineering. I have extensive experience in architecture, construction management, project management, program management, forensic evaluations, design-build integration, constructability, estimating, landscaping, premises liability, value management, geotechnics, foundations, planning / scheduling, and quality assurance in private and public projects, including recreation and waterfront / marine facilities, in addition to mass transit, and airports. I have additional experience with bridges, long span bridges, suspension bridges, cable stay bridges, steel bridges, segmental concrete, and concrete arch. I have more than 5 years expert witness experience.

Expert 47022 - CA(S) NV OR

Expertise Description

I have over 20 years of professional experience in architecture specializing in commercial architecture and residential architecture, forensic architectural issues, architectural standard of care, and water intrusion failure analysis. My other areas of expertise include contractor delay claims, Americans with Disabilities Act (ADA), ADA analysis, mold remediation repairs, and course of construction claims disputes. I have more than 15 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 51143 - MS MT TN

Expertise Description

I have over 35 years of diversified research and development and plant management experience predominantly in the forest products industry with major international chemical and wood product organizations. My expertise includes biocides (pressure/non-pressure), fire retardants, formulation development, wood treatment processes, wood chemistry, standardized testing, basic research, wood adhesives, code and regulatory issues, building systems, distribution and transmission poles, utility poles, Copper Chrome Arsenate (CCA), quality control (SPC, TQM) with numerous publications, presentations and patents in these areas. I have more than 20 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 48086 - CA(N)

Expertise Description

I have over 25 years experience as a professional engineer and licensed general contractor in consulting, design, construction project management, university teaching, and research. I specializes in structural analysis / design, damage and failure investigations, and construction defects / accidents. I have expertise in performance evaluation of constructed facilities including the effects of natural (wind, earthquake, flood, fire) and man-made (vibrations, blast and impact) hazards, damage assessment, and repair and retrofit design. Has served as an expert on small and multi-million-dollar claims. My experience includes buildings, bridges, concrete cooling towers, offshore platforms, silos, damage investigation of single and multi-family residential, commercial and historic buildings, storage tanks and underground water conduits, blast in underground coal mines, explosion in a chemical plant, effect demolition, pile driving and new construction on adjacent buildings, excessive floor vibrations, cracking, settlement, wind, fire and flooding damage, foundation distress, retaining walls, slabs and pavements, evaluation of defective concrete, terrazzo and other construction materials, water intrusion damage, contract disputes, product liability, accidents, personal injury, property damage, and failures during construction. I have more than 15 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 43293 - NY

Expertise Description

I have over 35 years experience in the investigation, evaluation and resolution of commercial, industrial, and institutional roofing and waterproofing deficiencies, which involves an expertise of the building interior and building envelope. I have experience protecting built environments from water intrusion and wind damage. I have more than 15 years expert witness experience.

Expert 30219 - CA(N)

Expertise Description

I have over 30 years experience in civil engineering, geology, and geophysics. My areas of expertise include hydrogeology, landslide, expansive soils, flood, water / sewer leaks, structural analysis, settlement, earthquake, earth movements, and groundwater evaluation, as well as vibration analysis. I have prior expert witness experience.

Expert 8945 - AZ CA(N) HI OK TX UT

Expertise Description

I have over 40 years experience in architecture and construction as a principal planner and designer specializing in various types of building structures. My expertise includes project management, facilities programming, planning/urban design & public hearings, contract documents and coordination, specifications & material research, cost estimating & project scheduling, and construction contract administration. I have more than 25 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 462716 - IA IL IN MI MN

Expertise Description

I have more than 30 years experience in the fields of Product Design and Failure Analysis with expertise in the manufacture of the subject part. I have experience with analyzing the physical stresses that arise in a product under various loading conditions, and in determining if the design is sufficient to survive such loads, and investigating product failures and accidents analysis from a fundamental engineering perspective, often applying finite element analysis. I have provided consulting experience in the energy, construction, industrial, thermal fatigue, medical, transportation, crane failures, marine, commercial, utility and residential industries. I have over 15 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 461230 - AR OK TX

Expertise Description

I have more than 15 years experience in the field of Architecture with expertise in Civil Engineering, Structural Engineering, and Accessibility. I have experience with industrial buildings, earth retention, investigations on architectural evaluations of elevator failures; retaining wall failure building impact investigation; historic building fire damage renovation; new construction; office addition into existing metal building, wood, steal, and concrete; storage building addition to existing fire station, and architectural design, building evaluation, building assessment, production and management. I have over 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 460274 - UT

Expertise Description

I have more than 10 years experience in the field of Civil Engineering with expertise in damage and failure, forensic structural and civil engineering investigations, construction defect evaluations, building envelop and moisture intrusion problems, wind/hail and earthquake damage evaluations, claim appraisal work, subrogation potential, product failure analysis, and slip/fall analysis. I have experience with wood, masonry, concrete, and steel design. I have over 5 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 452934 - NY

Expertise Description

I have more than 40 years experience in the field of Civil Engineering with expertise in rating and inspecting bridges, rehabilitation and replacement of parking ramps, water/sewer design, environmental urban designs, and sidewalk and asphalt concrete paving projects. I have additional knowledge in civil design, design drafting, land surveying, property searches, layout work, and reports. I have over 30 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 443066 - KY NY

Expertise Description

I have more than 25 years experience in the fields of Civil and Structural Engineering. My expertise includes structural analysis, structural design,structural performance, environmental engineering, masonry design, wood design, and project management. I have additional knowledge in alternative energy efficient designs, solar heating and cooling, trenchless technologies for pipeline rehabilitation in gas distribution networks, and seismic performance of Masonry and Masonry veneer. I have over 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 411605 - MD

Expertise Description

I have over 25 years experience in the field of Chemical Engineering. My extensive experience includes mechanical / structural process design, structural design, electrical design, and project management. I have comprehensive experience in engineering consulting services including environmental compliance certifications, project management, mechanical / electrical / plumbing design and review, structural design and review, chemical process design and environmental survey for industrial and commercial clients. I have more than 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 400840 - CA(S)

Expertise Description

I have experience in the Nondestructive Testing and Welding Industry. I have extensive experience as a Nondestructive testing (NDT) level II in radiographic testing (RT), penetrant testing (PT), ultrasonic testing (UT), visual testing (VT), leak testing (LT), and magnetic particle (MT) on aerospace components, weldment assemblies, composites, forgings, structural steel, field refineries, pipelines, power plants and concrete applications both in labs and in the field. My additional experience includes managing fluoroscopic inspection (real time), spectrometer, Brinell scale, radiation safety and safety, welding inspections, teaching radiography, Eddy current, personnel safety, developing written practices and procedures, maintaining machine operations, and administrating level I, II, and III certification examinations. I have prior expert witness experience.

Expert 343221 - OR

Expertise Description

I have more than 15 years experience in the field of Construction. My experience includes commercial estimating, structural engineering design, and construction management. My research includes seismic testing and calibration. I have prior expert witness experience.

Expert 27115 - CA(N)

Expertise Description

I have more than 15 years experience in mechanical engineering with a focus on design and failure analysis (failure of bolts and bolted connections to dynamic stability of scissors lifts and excavators to mechanical failure of hydraulic system components to mechanical behavior of industrial equipment), engineering research (detailed studies of the flange stress response, creep behavior of longitudinally welded pipes at high temperature, design of structural supports for a cryogenic superconducting MRI machine, design review of medical implants, dynamic analysis of multistory manufacturing facilities, and frequency analysis of silicon wafer fabrication components), Finite Element Analysis (simple two dimensional linear elastic analysis of pressure vessels to complete three dimensional nonlinear analysis of a bolted engine connecting rod and full contact dynamic analyses of crane clutch components), Accident Reconstruction and Crash worthiness, and Mechanical Testing. I have extensive experience in industrial equipment injuries and failures, including fans and other rotating machinery. I have over 10 years expert witness experience with consultations, deposition, and courtroom testimony.

Expert 322091 - MA

Expertise Description

I have more than 25 years experience in the field of Aeronautical and Astronautical Engineering. I specialize in Structural Dynamics, Fluid Dynamics, Aero elasticity and the application of Active Materials in these areas. My expertise and research include the fields of aircraft, helicopters, hypersonic missiles, oil exploration, valves for spacecraft and automotive injection systems, health monitoring of structures, energy harvesting, sensors and actuators.

Expert 324766 - AZ CA(N) CA(S) NV

Expertise Description

I have more than 15 years experience in the field of Structural Engineering, Defects, Damage & Failure Analysis. My expertise includes investigations on structural damage, failure, and collapse as wells as defect studies and code compliances. I teach courses on structural design, earthquake engineering, and material properties. I have prior expert witness experience with consultations, deposition, and courtroom testimony.

Expert 166392 - OH

Expertise Description

I have over 30 years experience in the field of Geotechnical & Structural Engineering, including prediction, building evaluation, measurement, and analysis. My areas of expertise include Soil and Structural Dynamics; Soil and Structural Vibrations from Blasting, Pile Driving, Machine Foundations, and other Construction and Industrial Sources; Application of Dynamic Methods to Piles; Wave Equation Analysis, Pile Integrity Testing, and Engineering Evaluation of High Strain Dynamic Pile Testing. I have prior expert witness experience with consultations, deposition, and courtroom testimony.

Expert 341985 - NY

Expertise Description

I have over 25 years experience in various engineering and construction capacities. My experience and work assignments include various aspects of the main disciplines of Engineering and Environmental consulting including but not limited to: building sites; building and safety codes compliance; facility assessments; cost of repair; windows installation; construction and project management; carbon monoxide formation; physical condition surveys; reserve funding analysis; thermal expansion and contraction; plumbing; electrical; heating, ventilating, and air conditioning design inspection and evaluation; and preparation of contract documents and specifications for repairs and restoration of buildings and site items. I have more than 20 years expert witness experience with consultations, deposition, and courtroom testimony.